Reverse Lights Not Working [message #131013] |
Mon, 20 June 2011 01:09 |
waynefraser
Messages: 38 Registered: December 2010 Location: Delta, BC
Karma: 0
|
Member |
|
|
Hi All
Reverse (back-up) lights not working. Bulbs and fuse OK. 12v st the fuse box and 0v at the socket while in reverse gear.
Does anyone have any suggestions on where to start my troubleshooting?
Cheers and Thanks, Wayne
Wayne Fraser,
1973 Glacier 260,
Ladner, BC
|
|
|
|
|
|
Re: Reverse Lights Not Working [message #131020 is a reply to message #131019] |
Mon, 20 June 2011 01:54 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
The wiring diagram shows that the back up lights are a #16 light green wire on the neutral safety switch. The other side of the switch contact is fed by two wires on one terminal. One wire is a #16 dark green and the second is a #18 pink with a double black stripe. I would stick a meter on those two terminals looking for +12 when the key is on and the gear shift is in reverse. What you read there will tell you which way to go looking for the missing voltage.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
[Updated on: Mon, 20 June 2011 01:56] Report message to a moderator
|
|
|
|
|
|