Home » Public Forums » GMCnet » Onan-Pertronix install
| Onan-Pertronix install [message #128593] |
Sat, 04 June 2011 08:18  |
2-4 the road
Messages: 145
Registered: June 2009
Location: Fulltimers
Karma: 0
|
Senior Member |
|
|
Where can I find diagrams-instructions
for installing the pertronix mod on my
Onan.
Thanks
Bill
2-4 the road
77 Kingsley 455
|
|
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128603 is a reply to message #128597] |
Sat, 04 June 2011 09:21  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Bill,
Rather than the Ford or VW modules listed, I'm back to recommending
the Pertronix unit for Oldsmobile -- 1181, IIRC. It's the same one
that you'd use if you wanted to convert a non-HEI GMC. The modules
all work the same but the bracket you'll have to make varies.
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI+ & EBL
www.gmcwipersetc.com
On Sat, Jun 4, 2011 at 9:42 AM, Rob Mueller <robmueller@iinet.net.au> wrote:
> Bill,
>
> You have a choice of Pertronix unit and method of installation.
>
> Here: http://www.gmcmhphotos.com/photos/showphoto.php?photo=6785&cat=3608
>
> And here: http://www.gmcmhphotos.com/photos/showphoto.php?photo=33113
>
> This is a Pertronics unit for a VW. I didn't write any instructions.
>
> Regards,
> Rob M.
> USAussie - Downunder
> AUS '75 Avion - The Blue Streak TZE365V100428
> USA '75 Avion - Double Trouble TZE365V100426
>
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of JoAnne Bissell
> Sent: Saturday, June 04, 2011 11:19 PM
> To: gmclist@temp.gmcnet.org
> Subject: [GMCnet] Onan-Pertronix install
>
> Where can I find diagrams-instructions
> for installing the pertronix mod on my
> Onan.
> Thanks
> Bill
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128622 is a reply to message #128603] |
Sat, 04 June 2011 10:36 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
Why this. One?
Gene
FREE WIFI @ Mickey D
On Jun 4, 2011, at 7:21 AM, Ken Henderson <hend4800@bellsouth.net> wrote:
> Bill,
>
> Rather than the Ford or VW modules listed, I'm back to recommending
> the Pertronix unit for Oldsmobile -- 1181, IIRC. It's the same one
> that you'd use if you wanted to convert a non-HEI GMC. The modules
> all work the same but the bracket you'll have to make varies.
>
> Ken H.
> Americus, GA
> '76 X-Birchaven w/Cad500/Howell EFI+ & EBL
> www.gmcwipersetc.com
>
>
>
> On Sat, Jun 4, 2011 at 9:42 AM, Rob Mueller <robmueller@iinet.net.au> wrote:
>> Bill,
>>
>> You have a choice of Pertronix unit and method of installation.
>>
>> Here: http://www.gmcmhphotos.com/photos/showphoto.php?photo=6785&cat=3608
>>
>> And here: http://www.gmcmhphotos.com/photos/showphoto.php?photo=33113
>>
>> This is a Pertronics unit for a VW. I didn't write any instructions.
>>
>> Regards,
>> Rob M.
>> USAussie - Downunder
>> AUS '75 Avion - The Blue Streak TZE365V100428
>> USA '75 Avion - Double Trouble TZE365V100426
>>
>>
>> -----Original Message-----
>> From: gmclist-bounces@temp.gmcnet.org
>> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of JoAnne Bissell
>> Sent: Saturday, June 04, 2011 11:19 PM
>> To: gmclist@temp.gmcnet.org
>> Subject: [GMCnet] Onan-Pertronix install
>>
>> Where can I find diagrams-instructions
>> for installing the pertronix mod on my
>> Onan.
>> Thanks
>> Bill
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128652 is a reply to message #128622] |
Sat, 04 June 2011 15:40 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
| Mr ERFisher wrote on Sat, 04 June 2011 10:36 |
Why this. One?
Gene
|
With the 1181 you do not have to fashion a new mounting bracket. You can take the one supplied, bend it 90 degrees, and use it.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128655 is a reply to message #128652] |
Sat, 04 June 2011 15:43 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Ken B,
Can you illustrate, as I can't finger it out for sure.
On Sat, Jun 4, 2011 at 1:40 PM, Ken Burton <n9cv@comcast.net> wrote:
>
>
> Mr ERFisher wrote on Sat, 04 June 2011 10:36
>> Why this. One?
>> Gene
>
> With the 1181 you do not have to fashion a new mounting bracket. Â You can take the one supplied, bend it 90 degrees, and use it.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128657 is a reply to message #128655] |
Sat, 04 June 2011 16:01 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
| jimk wrote on Sat, 04 June 2011 15:43 |
Ken B,
Can you illustrate, as I can't finger it out for sure.
On Sat, Jun 4, 2011 at 1:40 PM, Ken Burton <n9cv@comcast.net> wrote:
>
>
> Mr ERFisher wrote on Sat, 04 June 2011 10:36
>> Why this. One?
>> Gene
>
> With the 1181 you do not have to fashion a new mounting bracket. Â You can take the one supplied, bend it 90 degrees, and use it.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
|
Not easily Jim. I would have to go out to the airport and tear my ONAN apart to get a picture. All I can say is to bend the flat piece of the bracket to a 90 degree angle. I double face foam tape the the bracket in position on the rear shroud. I sometimes clamp or vice grip them in position on top of the tape. When you have it positioned with the clearance checked and the timing set, drill two holes in the bracket and mount it permanently to the rear shroud.
Note: I always check the timing with a timing light BEFORE drilling the holes and permanently mounting the unit.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128668 is a reply to message #128657] |
Sat, 04 June 2011 16:46 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I think I fingured it out finally.
On Sat, Jun 4, 2011 at 2:01 PM, Ken Burton <n9cv@comcast.net> wrote:
>
>
> jimk wrote on Sat, 04 June 2011 15:43
>> Ken B,
>> Can you illustrate, as I can't finger it out for sure.
>>
>> On Sat, Jun 4, 2011 at 1:40 PM, Ken Burton <n9cv@comcast.net> wrote:
>> >
>> >
>> > Mr ERFisher wrote on Sat, 04 June 2011 10:36
>> >> Why this. One?
>> >> Gene
>> >
>> > With the 1181 you do not have to fashion a new mounting bracket.  You can take the one supplied, bend it 90 degrees, and use it.
>> > --
>> > Ken Burton - N9KB
>> > 76 Palm Beach
>> > Hebron, Indiana
>>
>>
>> --
>> Jim Kanomata
>> Applied/GMC, Fremont,CA
>> jimk@appliedairfilters.com
>> http://www.appliedgmc.com
>> 1-800-752-7502
>> _______________________________________________
>
>
> Not easily Jim. Â I would have to go out to the airport and tear my ONAN apart to get a picture. Â All I can say is to bend the flat piece of the bracket to a 90 degree angle. Â I double face foam tape the the bracket in position on the rear shroud. Â I sometimes clamp or vice grip them in position on top of the tape. Â When you have it positioned with the clearance checked and the timing set, drill two holes in the bracket and mount it permanently to the rear shroud.
>
> Note: Â I always check the timing with a timing light BEFORE drilling the holes and permanently mounting the unit.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128672 is a reply to message #128603] |
Sat, 04 June 2011 17:09 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
does not come with magnets does it?
gene
On Sat, Jun 4, 2011 at 7:21 AM, Ken Henderson <hend4800@bellsouth.net>wrote:
> Bill,
>
> Rather than the Ford or VW modules listed, I'm back to recommending
> the Pertronix unit for Oldsmobile -- 1181, IIRC. It's the same one
> that you'd use if you wanted to convert a non-HEI GMC. The modules
> all work the same but the bracket you'll have to make varies.
>
> Ken H.
> Americus, GA
> '76 X-Birchaven w/Cad500/Howell EFI+ & EBL
> www.gmcwipersetc.com
>
>
>
> On Sat, Jun 4, 2011 at 9:42 AM, Rob Mueller <robmueller@iinet.net.au>
> wrote:
> > Bill,
> >
> > You have a choice of Pertronix unit and method of installation.
> >
> > Here:
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=6785&cat=3608
> >
> > And here: http://www.gmcmhphotos.com/photos/showphoto.php?photo=33113
> >
> > This is a Pertronics unit for a VW. I didn't write any instructions.
> >
> > Regards,
> > Rob M.
> > USAussie - Downunder
> > AUS '75 Avion - The Blue Streak TZE365V100428
> > USA '75 Avion - Double Trouble TZE365V100426
> >
> >
> > -----Original Message-----
> > From: gmclist-bounces@temp.gmcnet.org
> > [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of JoAnne Bissell
> > Sent: Saturday, June 04, 2011 11:19 PM
> > To: gmclist@temp.gmcnet.org
> > Subject: [GMCnet] Onan-Pertronix install
> >
> > Where can I find diagrams-instructions
> > for installing the pertronix mod on my
> > Onan.
> > Thanks
> > Bill
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128674 is a reply to message #128672] |
Sat, 04 June 2011 17:20 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Certainly the 1181 comes with magnets -- all embedded in the wheel
which mounts on the shaft. As do all of the Ignitor series. Just cut
one out with wire cutters to epoxy into the flywheel.
Ken H.
On Sat, Jun 4, 2011 at 6:09 PM, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:
> does not come with magnets does it?
> gene
>
>
> On Sat, Jun 4, 2011 at 7:21 AM, Ken Henderson <hend4800@bellsouth.net>wrote:
>
>> Bill,
>>
>> Rather than the Ford or VW modules listed, I'm back to recommending
>> the Pertronix unit for Oldsmobile -- 1181, IIRC. It's the same one
>> that you'd use if you wanted to convert a non-HEI GMC. The modules
>> all work the same but the bracket you'll have to make varies.
>>
>> Ken H.
>> Americus, GA
>> '76 X-Birchaven w/Cad500/Howell EFI+ & EBL
>> www.gmcwipersetc.com
>>
>>
>>
>> On Sat, Jun 4, 2011 at 9:42 AM, Rob Mueller <robmueller@iinet.net.au>
>> wrote:
>> > Bill,
>> >
>> > You have a choice of Pertronix unit and method of installation.
>> >
>> > Here:
>> http://www.gmcmhphotos.com/photos/showphoto.php?photo=6785&cat=3608
>> >
>> > And here: http://www.gmcmhphotos.com/photos/showphoto.php?photo=33113
>> >
>> > This is a Pertronics unit for a VW. I didn't write any instructions.
>> >
>> > Regards,
>> > Rob M.
>> > USAussie - Downunder
>> > AUS '75 Avion - The Blue Streak TZE365V100428
>> > USA '75 Avion - Double Trouble TZE365V100426
>> >
>> >
>> > -----Original Message-----
>> > From: gmclist-bounces@temp.gmcnet.org
>> > [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of JoAnne Bissell
>> > Sent: Saturday, June 04, 2011 11:19 PM
>> > To: gmclist@temp.gmcnet.org
>> > Subject: [GMCnet] Onan-Pertronix install
>> >
>> > Where can I find diagrams-instructions
>> > for installing the pertronix mod on my
>> > Onan.
>> > Thanks
>> > Bill
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128681 is a reply to message #128674] |
Sat, 04 June 2011 18:20 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
Hummmm
Did not show in Jimk pix
Gene
FREE WIFI @ Mickey D
On Jun 4, 2011, at 3:20 PM, Ken Henderson <hend4800@bellsouth.net> wrote:
> Certainly the 1181 comes with magnets -- all embedded in the wheel
> which mounts on the shaft. As do all of the Ignitor series. Just cut
> one out with wire cutters to epoxy into the flywheel.
>
> Ken H.
>
>
> On Sat, Jun 4, 2011 at 6:09 PM, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:
>> does not come with magnets does it?
>> gene
>>
>>
>> On Sat, Jun 4, 2011 at 7:21 AM, Ken Henderson <hend4800@bellsouth.net>wrote:
>>
>>> Bill,
>>>
>>> Rather than the Ford or VW modules listed, I'm back to recommending
>>> the Pertronix unit for Oldsmobile -- 1181, IIRC. It's the same one
>>> that you'd use if you wanted to convert a non-HEI GMC. The modules
>>> all work the same but the bracket you'll have to make varies.
>>>
>>> Ken H.
>>> Americus, GA
>>> '76 X-Birchaven w/Cad500/Howell EFI+ & EBL
>>> www.gmcwipersetc.com
>>>
>>>
>>>
>>> On Sat, Jun 4, 2011 at 9:42 AM, Rob Mueller <robmueller@iinet.net.au>
>>> wrote:
>>>> Bill,
>>>>
>>>> You have a choice of Pertronix unit and method of installation.
>>>>
>>>> Here:
>>> http://www.gmcmhphotos.com/photos/showphoto.php?photo=6785&cat=3608
>>>>
>>>> And here: http://www.gmcmhphotos.com/photos/showphoto.php?photo=33113
>>>>
>>>> This is a Pertronics unit for a VW. I didn't write any instructions.
>>>>
>>>> Regards,
>>>> Rob M.
>>>> USAussie - Downunder
>>>> AUS '75 Avion - The Blue Streak TZE365V100428
>>>> USA '75 Avion - Double Trouble TZE365V100426
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: gmclist-bounces@temp.gmcnet.org
>>>> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of JoAnne Bissell
>>>> Sent: Saturday, June 04, 2011 11:19 PM
>>>> To: gmclist@temp.gmcnet.org
>>>> Subject: [GMCnet] Onan-Pertronix install
>>>>
>>>> Where can I find diagrams-instructions
>>>> for installing the pertronix mod on my
>>>> Onan.
>>>> Thanks
>>>> Bill
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>>
>>
>>
>>
>> --
>> Gene Fisher -- 74-23,77PB/ore/ca
>> “Give a man a fish; you have fed him for today --- give him a URL and
>> -------
>> http://gmcmotorhome.info/
>> Alternator Protection Cable
>> http://gmcmotorhome.info/APC.html
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Onan-Pertronix install [message #128682 is a reply to message #128668] |
Sat, 04 June 2011 18:24 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
G'day,
Here's the picture of how to install the magnet in the flywheel, I would
suggest making the hole shallow so that the magnet sits proud of the
flywheel. That will increase the distance between the flywheel and the
Pertronix.
http://www.gmcmhphotos.com/photos/showphoto.php?photo=6801
The reason being is that the flywheels are a casting and the one on Double
Trouble's Onan was not true. When John Sharpe and I installed mine I set it
at a tight 0.030 and when fired it up the first time the flywheel hit the
Pertronics. We installed a second unit and IIRC set it at 0.060 away from
the magnet and I flap wheeled the flywheel to make sure it cleared. I
noticed after doing that the vibrations increased. I just had the flywheel
on the Onan checked; it was out of balance and had to be drilled to bring it
back in balance.
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
Goto Forum:
Current Time: Wed Jul 03 00:01:27 CDT 2024
Total time taken to generate the page: 0.00942 seconds
|
GMCforum
Search
Help
Register
Login
Home
