[GMCnet] Monitor Panel Gauges/Diagnosis [message #120306] |
Tue, 29 March 2011 21:03 |
GMCPalmBeachSTL
Messages: 3 Registered: March 2011
Karma: 0
|
Junior Member |
|
|
My Holding Tank Gauge and my Propane Gauge are giving false readings. The
holding Tank Gauge seems to be displaying the read of the LP tank. The Fresh
Water Gauge died last fall when going into storage. Where should I start?
Ready to get out of the garage for first day out in 2011 this Sunday.
Thanks in advance,
TJ Rinn
455 Palm Beach 77
St. Louis
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Monitor Panel Gauges/Diagnosis [message #120309 is a reply to message #120306] |
Tue, 29 March 2011 21:29 |
Bob de Kruyff
Messages: 4260 Registered: January 2004 Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
GMCPalmBeachSTL wrote on Tue, 29 March 2011 20:03 | My Holding Tank Gauge and my Propane Gauge are giving false readings. The
holding Tank Gauge seems to be displaying the read of the LP tank. The Fresh
Water Gauge died last fall when going into storage. Where should I start?
Ready to get out of the garage for first day out in 2011 this Sunday.
Thanks in advance,
TJ Rinn
455 Palm Beach 77
St. Louis
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
Welcome to holding tank sender hell. I wouls first plug and unplug the sender wire at the propane tank to see what happnes. It's unlikely ttah the senders are miswired.As far as holding and fresh seners, they are very troublesome and there are multiple solutions. First start with the propane and see if anything changes.
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|
|
|
Re: [GMCnet] Monitor Panel Gauges/Diagnosis [message #120329 is a reply to message #120320] |
Wed, 30 March 2011 08:08 |
tphipps
Messages: 3005 Registered: August 2004 Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
When you remove and clean the connectors, be sure and put some anti-oxidant paste on them. They will cause less trouble in the future. Very inexpensive fix for many electrical problems involving connections and sockets. I carry a tube in my tool box.
Tom
P.S. Yes, I bought another GMC
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|