GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] What's Up with Electronic Fuel Injection?
[GMCnet] What's Up with Electronic Fuel Injection? [message #118416] Fri, 11 March 2011 11:04 Go to next message
Kimberlea Weeks is currently offline  Kimberlea Weeks   United States
Messages: 675
Registered: July 2010
Karma: 6
Senior Member
*Don't miss this seminar at the 2011 GMCMI Spring Convention!*

* “What’s Up” with Electronic Fuel Injection?*
Tech Session - Randy Van Winkle with Bob Drewes
The objective of this seminar is to provide an introduction into fuel
injection for the GMC Motor Home. A discussion of some of the benefits of
fuel injection along with simple explanations about how the computer
controls the fuel and spark advance. Much of the session will actually show
the computer controlling the engine and “learning” how to best meet
requirements of the engine. Results of testing with lean cruise and how to
get better mpg will be discussed. Tuning tips will be provided during the
session.

Watch for more updates on an exciting convention to be held Sunday, April 10
- Friday, April 15 in Patterson, Louisiana.

Kimberlea Weeks
Convention Manager

*GMC Motorhomes International*
SUMMER | 29903 Canary Lane | Breezy Point | MN | 56472
WINTER | 1402 So. Cage | 273 Painted Cup | Pharr | TX 78577
612.501.4600

*Don't Miss the 2011 GMCMI Spring Convention!*
Sunday, April 10 - Friday, April 15, 2011
Patterson Civic Center | Patterson, Louisiana
Information and registration form available at www.gmcmi.com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] What's Up with Electronic Fuel Injection? [message #118433 is a reply to message #118416] Fri, 11 March 2011 12:50 Go to previous messageGo to next message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
Kim, tell them to start basic so I can get up to speed. I am ready to convert from the Holley Projection to the ebl.
Dan


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
Re: [GMCnet] What's Up with Electronic Fuel Injection? [message #118437 is a reply to message #118433] Fri, 11 March 2011 13:06 Go to previous messageGo to next message
rvanwin is currently offline  rvanwin   United States
Messages: 325
Registered: April 2007
Location: Battlefield, MO
Karma: 6
Senior Member
WD0AFQ wrote on Fri, 11 March 2011 12:50

Kim, tell them to start basic so I can get up to speed. I am ready to convert from the Holley Projection to the ebl.
Dan

Dan,

I can't speak for Bob D. (he always does a quality job), but since I'm doing some of the presentation, it will have to, by necessity, be basic Smile. Should be fun! Probably won't be a complete "how-to" for converting from the Projection system to EBL but, hopefully, a good intro and tutorial for EFI. Plus some good information for all the Carb guys too - lean cruise, Power Enrichment, all applies to carburetor-ed engines. Just ask questions - that is always helpful to everyone.


Randy & Margie
'77 Eleganza II '403'
Battlefield, MO
Re: [GMCnet] What's Up with Electronic Fuel Injection? [message #118444 is a reply to message #118437] Fri, 11 March 2011 14:23 Go to previous messageGo to next message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
Randy, I knew that would bring you and/or George out.
I need yall to help me a bit to get started. I have the computer, dist, and a throttle body drilled for a screw in stepper. Need some basic info to get me going. I had other things on my mind last Fall when yall did such a good job in Du Quoin. Mr. Drews is such a nice guy that I know I can corner him and get some info.
See yall there.
Dan


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
Re: [GMCnet] What's Up with Electronic Fuel Injection? [message #118447 is a reply to message #118433] Fri, 11 March 2011 14:53 Go to previous messageGo to next message
Surbo is currently offline  Surbo   United States
Messages: 213
Registered: February 2004
Karma: 0
Senior Member
WD0AFQ wrote on Fri, 11 March 2011 12:50

Kim, tell them to start basic so I can get up to speed. I am ready to convert from the Holley Projection to the ebl.
Dan


Dan;
Randy and I will try and keep it basic, but after doing over 30 seminars for GMCMI, I have found it is a real squeeze to get most of the material covered in the time frame of the seminar. The topic of fuel injection is a category that is a real challenge to keep it basic, because in order to show how "this works" it involves digging a little deeper into another level.

Just ask questions if you don't know and we will try to explain. The best thing going for this subject is that fuel injection works, especially if tuned correctly. Hope to see ya all in Patterson.

Bob Drewes in SESD '73 w/455 w/TBI w/EBL
Re: [GMCnet] What's Up with Electronic Fuel Injection? [message #118452 is a reply to message #118447] Fri, 11 March 2011 15:26 Go to previous message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
Thanks Bob. I will give you extra ice cream for some of your valued time. I am thinking a little one on one. Very Happy
See you there. We roll east Monday. Heading over to Billie Young's.
Dan


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
Previous Topic: Re: [GMCnet] Hensley GMC Motorhome Airbag Solution
Next Topic: Re: [GMCnet] Hensley GMC Motorhome Airbag Solution
Goto Forum:
  


Current Time: Sat Nov 16 13:28:51 CST 2024

Total time taken to generate the page: 0.00844 seconds