Home » Public Forums » GMCnet » Wheels, Belts, Steering boxes, etc. (Two words: Applied GMC)
Wheels, Belts, Steering boxes, etc. [message #117750] |
Sun, 06 March 2011 11:40 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
Lately there has been quite a bit of discussion on where to find the proper steering box, belts, wheels, etc. It's a no brainer; Call Applied GMC! They have the right parts and the know how to help us keep our GMCs on the road. They ship promptly and, in most cases, you will have the parts before you are ready to tackle the job. If you are stranded somewhere, they will over-night stuff to you. We owe it to our specialty suppliers to give them as much of our business as possible. Besides, this is their slow season and these guys need the business! I really want them to be there for years to come so I can continue to make improvements to my coach, and my wife and I can continue to have fun in it...safely.
When it comes to 16" wheels, we don't have too many options and Jim has those covered too with the reasonably priced Eagle rims he has made available to us. Again, Jim has the most competitive prices that I've seen for the complete package (wheel, lug nuts, and caps)
I don't work for either of the jim's, or even get a discount, but I do support them with my business so they CAN continue to support me with replacement parts and innovative new products that help me to keep my coach on the road. In fact, I am just taking a break from repairing my dash HVAC control, among other things, with parts that were delivered to my front door earlier this week, from Applied GMC.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
Re: [GMCnet] Wheels, Belts, Steering boxes, etc. [message #117754 is a reply to message #117750] |
Sun, 06 March 2011 12:12 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Carl,
I appreciate your feedback very much.
We have lot of people that think along the same lines as you, but
those that need to strech their budget, they tend to have more time to
look around and shop.
Lot of you need to sign up for the GMC International so you can
receive the parts reference.
It is not 100%, but comes close to it. I know we send in information
for that purpose.
The best $30 you can spend.
We have seen several parts being discontinued, when that happens, we
try to get the other GMC places to combine or efforts and order in a
group.
On Sun, Mar 6, 2011 at 9:40 AM, Carl Stouffer <carljr3b@yahoo.com> wrote:
>
>
> Lately there has been quite a bit of discussion on where to find the proper steering box, belts, wheels, etc. It's a no brainer; Call Applied GMC! They have the right parts and the know how to help us keep our GMCs on the road. They ship promptly and, in most cases, you will have the parts before you are ready to tackle the job. If you are stranded somewhere, they will over-night stuff to you. We owe it to our specialty suppliers to give them as much of our business as possible. Besides, this is their slow season and these guys need the business! I really want them to be there for years to come so I can continue to make improvements to my coach, and my wife and I can continue to have fun in it...safely.
>
> When it comes to 16" wheels, we don't have too many options and Jim has those covered too with the reasonably priced Eagle rims he has made available to us. Again, Jim has the most competitive prices that I've seen for the complete package (wheel, lug nuts, and caps)
>
> I don't work for either of the jim's, or even get a discount, but I do support them with my business so they CAN continue to support me with replacement parts and innovative new products that help me to keep my coach on the road. In fact, I am just taking a break from repairing my dash HVAC control, among other things, with parts that were delivered to my front door earlier this week, from Applied GMC.
> --
> Carl S.
> '75 ex Palm Beach
> Tucson, AZ.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] Wheels, Belts, Steering boxes, etc. [message #117755 is a reply to message #117750] |
Sun, 06 March 2011 12:16 |
|
hnielsen2
Messages: 1434 Registered: February 2004 Location: Alpine CA
Karma: 0
|
Senior Member |
|
|
Yes,Yes,Yes.
With out the Jim's we are out of luck.
Howard
Alpine CA
----- Original Message -----
From: "Carl Stouffer" <carljr3b@yahoo.com>
To: <gmclist@temp.gmcnet.org>
Sent: Sunday, March 06, 2011 9:40 AM
Subject: [GMCnet] Wheels, Belts, Steering boxes, etc.
>
>
> Lately there has been quite a bit of discussion on where to find the
> proper steering box, belts, wheels, etc. It's a no brainer; Call Applied
> GMC! They have the right parts and the know how to help us keep our GMCs
> on the road. They ship promptly and, in most cases, you will have the
> parts before you are ready to tackle the job. If you are stranded
> somewhere, they will over-night stuff to you. We owe it to our specialty
> suppliers to give them as much of our business as possible. Besides, this
> is their slow season and these guys need the business! I really want them
> to be there for years to come so I can continue to make improvements to my
> coach, and my wife and I can continue to have fun in it...safely.
>
> When it comes to 16" wheels, we don't have too many options and Jim has
> those covered too with the reasonably priced Eagle rims he has made
> available to us. Again, Jim has the most competitive prices that I've
> seen for the complete package (wheel, lug nuts, and caps)
>
> I don't work for either of the jim's, or even get a discount, but I do
> support them with my business so they CAN continue to support me with
> replacement parts and innovative new products that help me to keep my
> coach on the road. In fact, I am just taking a break from repairing my
> dash HVAC control, among other things, with parts that were delivered to
> my front door earlier this week, from Applied GMC.
> --
> Carl S.
> '75 ex Palm Beach
> Tucson, AZ.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|
Re: [GMCnet] Wheels, Belts, Steering boxes, etc. [message #117767 is a reply to message #117754] |
Sun, 06 March 2011 14:50 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
jimk wrote on Sun, 06 March 2011 11:12 | Carl,
I appreciate your feedback very much.
We have lot of people that think along the same lines as you, but
those that need to strech their budget, they tend to have more time to
look around and shop.
Lot of you need to sign up for the GMC International so you can
receive the parts reference.
It is not 100%, but comes close to it. I know we send in information
for that purpose.
The best $30 you can spend.
We have seen several parts being discontinued, when that happens, we
try to get the other GMC places to combine or efforts and order in a
group.
On Sun, Mar 6, 2011 at 9:40 AM, Carl Stouffer <carljr3b@yahoo.com> wrote:
>
>
> Lately there has been quite a bit of discussion on where to find the proper steering box, belts, wheels, etc. It's a no brainer; Call Applied GMC! They have the right parts and the know how to help us keep our GMCs on the road. They ship promptly and, in most cases, you will have the parts before you are ready to tackle the job. If you are stranded somewhere, they will over-night stuff to you. We owe it to our specialty suppliers to give them as much of our business as possible. Besides, this is their slow season and these guys need the business! I really want them to be there for years to come so I can continue to make improvements to my coach, and my wife and I can continue to have fun in it...safely.
>
> When it comes to 16" wheels, we don't have too many options and Jim has those covered too with the reasonably priced Eagle rims he has made available to us. Again, Jim has the most competitive prices that I've seen for the complete package (wheel, lug nuts, and caps)
>
> I don't work for either of the jim's, or even get a discount, but I do support them with my business so they CAN continue to support me with replacement parts and innovative new products that help me to keep my coach on the road. In fact, I am just taking a break from repairing my dash HVAC control, among other things, with parts that were delivered to my front door earlier this week, from Applied GMC.
> --
> Carl S.
> '75 ex Palm Beach
> Tucson, AZ.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
Jim,
I'm on a budget too. If I weren't, I would probably be able to support you single handedly for a couple of months. I also run a small business and know that the lowest price is seldom the best value. I do as much business as I can with you and Jim B. as I can because I value the service and I know that advice is just a phone call away.
I have lived in the same town for fifty years and have lots of connections when it comes to parts and mechanical services, yet it is still less of a hassle for me to buy parts from the GMC specialists. I KNOW I will be getting the right part and there will be no guessing about what will fit right or whether or not it will do the job.
That is not to mention the work you have done to bring us well thought out and designed items like the Quad Bag system and the brake reaction arm to improve and update our coaches. It is certainly in all of our best interests to keep it practical for you guys to stay in business.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
|
Re: [GMCnet] Wheels, Belts, Steering boxes, etc. [message #117821 is a reply to message #117817] |
Sun, 06 March 2011 21:47 |
|
WD0AFQ
Messages: 7111 Registered: November 2004 Location: Dexter, Mo.
Karma: 207
|
Senior Member |
|
|
I found out about the parts list when I bought my coach, it came with it. To keep it updated I became a member of GMCMI. Like mentioned above, that alone is worth the yearly dues. I still ask stupid parts questions as I can't always find my reading glasses to look it up. I know Rob M. will give me the part number within an hour as he has that list memorized.
I know Carl personally and know for a fact that he will not buy parts anywhere but from the Jims, if they have them. And, they normally do. There are many others out there, just like Carl, who know how tough it is to keep a small buisness running. they probably are the Jims' best customers. Life is good when you can help support friends.
Dan
3 In Stainless Exhaust Headers
One Ton All Discs/Reaction Arm
355 FD/Quad Bag/Alum Radiator Manny Tran/New eng.
Holley EFI/10 Tire Air Monitoring System
Solarized Coach/Upgraded Windows
Satelite TV/On Demand Hot Water/3Way Refer
|
|
|
Goto Forum:
Current Time: Wed Nov 20 05:13:31 CST 2024
Total time taken to generate the page: 0.00837 seconds
|