|
Re: [GMCnet] front seats [message #117589 is a reply to message #117571] |
Fri, 04 March 2011 20:50 |
|
billearnhardt wrote on Fri, 04 March 2011 17:21]
Well I finally installed the Honda seats
I now have 2 very nice GMC seats that are in the way, the PO had
recovered in a carmel brown color nagahyde, and paid big bucks for i
anyone need them?, for cheap or free?
call or E mail me
77 five 790-three 8 nine eight
Where are you located?
geo groth '73 260 Sequoia
Carson City Nevada 89703
|
|
|
Re: [GMCnet] front seats [message #117614 is a reply to message #117571] |
Sat, 05 March 2011 00:42 |
Luvn737s
Messages: 1106 Registered: June 2007
Karma: 2
|
Senior Member |
|
|
Mine are maroon cloth and just as free too.
I think I'll mount one to a swivel chair base for a nice office chair.
Randy
1973 26' Painted Desert
Ahwatukee (Phoenix) AZ
|
|
|
Re: [GMCnet] Front seats [message #248825 is a reply to message #117571] |
Tue, 29 April 2014 17:21 |
werewilfs
Messages: 329 Registered: July 2012 Location: Rappahannock County, VA
Karma: 0
|
Senior Member |
|
|
Dang. If only I lived closer to Indy than I do. Would cost me about $200 in gas RT to get them from you. Although that $200 is cheaper than some of the seats we’ve been looking at. You don’t ever happen to be “passing through” Virginia, do you? 😉
Sent from Windows Mail
From: David Jester
Sent: Tuesday, April 29, 2014 6:18 PM
To: gmclist@temp.gmcnet.org
I have a set of Flexsteel seats I replaced with Honda Odessey seat. They are kind of a red/maroon color and in great shape -- no rips, tears or much wear. I'd give them to you, if you could pick the up.
e-mail me and I can send pictures.
Dave
--
David A. Jester
Indianapolis, In
1975 Palm Beach
djester@comcast.net
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jared & Stefanie Kohl
Rappahannock County, VA
1973 Painted Desert "Onslow"
|
|
|
|
Re: [GMCnet] front seats [message #248838 is a reply to message #117571] |
Tue, 29 April 2014 18:39 |
werewilfs
Messages: 329 Registered: July 2012 Location: Rappahannock County, VA
Karma: 0
|
Senior Member |
|
|
Great point. (Not sure how my reply got over to this thread)
Actually there are a couple of people in our GMC Group down at Bean Station right now. Not sure if they have room to haul back 2 big seats though.
Jared & Stefanie Kohl
Rappahannock County, VA
1973 Painted Desert "Onslow"
|
|
|
Re: [GMCnet] Front seats [message #273807 is a reply to message #117571] |
Mon, 16 March 2015 11:29 |
Dolph Santorine
Messages: 1236 Registered: April 2011 Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
That was a finger fumble.
10 of ‘em, all thumbs.
Sorry.
Dolph
DE N8JPC
Wheeling, West Virginia
1977 26’ ex-PalmBeach
1-Ton, Sullybilt Bags, Reaction Arms, 3.70 LSD, Manny Transmission, EV-6010
“The Aluminum and Fiberglass Mistress"
> On Mar 16, 2015, at 12:27 PM, Dolph Santorine wrote:
>
> I’m going to hold and run the snot out of it this summer.
>
> The seats I have are not ideal, but they will work, and there are a ton of other things i need to attend to.
>
> BTW, I found the top for the air cleaner.
>
> Dolph
>
>
>> On Mar 16, 2015, at 9:58 AM, Michael wrote:
>>
>> I have air ride seats from a Class 8 Tractor in my GMC.
>> Very comfortable, lots of different support options.
>> I have driven straight from NC to CA by myself only stopping to eat and sleep and I had no issues.
>> I am 5'10" and I have them raised as high as they go, there was a spacer on the bottom when I got them that I took off.
>> I kind of wish I had kept it so the seats would not be at the highest point while driving.
>> It restricts the air suspension slightly.
>> I wish I had picked up a set with heat and massage.
>> Maybe the next set will have that.
>>
>> http://www.gmcmhphotos.com/photos/g6754-interior.html
>> --
>> 1973 GMC 26' Glacier - Unknown Mileage - Has a new switch pitch transmission with Powerdrive
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
Re: [GMCnet] Set of mirrors [message #315270 is a reply to message #315267] |
Fri, 31 March 2017 07:30 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
One suggestion,
do not tighten the swivel mount too tight.
We find that when a contact is made against anything solid, it need to
give, or face ripping the base mount.
On Thu, Mar 30, 2017 at 9:06 PM, Roger Hannon wrote:
> Thanks I ordered a set
>
> Sent from my iPhone
>
>> On Mar 29, 2017, at 7:45 PM, Bob Dunahugh wrote:
>>
>> Get the standard Ramco mirrors with turn signals from Jim K at Applied
> GMC. $371.50 I've been extremely pleased. Bob Dunahugh
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] Set of mirrors [message #315282 is a reply to message #315270] |
Fri, 31 March 2017 10:44 |
Roger Hannon
Messages: 5 Registered: March 2017
Karma: 0
|
Junior Member |
|
|
Great info. Thanks
Sent from my iPhone
> On Mar 31, 2017, at 5:31 AM, Jim Kanomata wrote:
>
> One suggestion,
> do not tighten the swivel mount too tight.
> We find that when a contact is made against anything solid, it need to
> give, or face ripping the base mount.
>
>
>> On Thu, Mar 30, 2017 at 9:06 PM, Roger Hannon wrote:
>>
>> Thanks I ordered a set
>>
>> Sent from my iPhone
>>
>>> On Mar 29, 2017, at 7:45 PM, Bob Dunahugh wrote:
>>>
>>> Get the standard Ramco mirrors with turn signals from Jim K at Applied
>> GMC. $371.50 I've been extremely pleased. Bob Dunahugh
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|