| [GMCnet] Installing blinds [message #116019] |
Mon, 21 February 2011 20:04  |
Don Hart
Messages: 87
Registered: October 2009
Karma: 0
|
Member |
|
|
My PO made the valances out of 3/4 x 1'' frame and the curve was glued
on foam and everything was wraped in vinyl. The blinds were installed
in the valances then the whole unit was set up behind the cabinets and
screwed threw the cabinet to hold the top and with L brackets at the
bottem, when I bought new blinds it was only a matter of popping out
the screws and removing the valances detaching the old ones and
reversing for installation. Nice and easy. just what I have.
Don Har
Corunna, MI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Installing blinds [message #116020 is a reply to message #116019] |
Mon, 21 February 2011 20:20  |
 |
hnielsen2
Messages: 1434
Registered: February 2004
Location: Alpine CA
Karma: 0
|
Senior Member |
|
|
Hi Don
Howard and Sue
Alpine
----- Original Message -----
From: "Don Hart" <hartdna2@gmail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Monday, February 21, 2011 6:04 PM
Subject: [GMCnet] Installing blinds
> My PO made the valances out of 3/4 x 1'' frame and the curve was glued
> on foam and everything was wraped in vinyl. The blinds were installed
> in the valances then the whole unit was set up behind the cabinets and
> screwed threw the cabinet to hold the top and with L brackets at the
> bottem, when I bought new blinds it was only a matter of popping out
> the screws and removing the valances detaching the old ones and
> reversing for installation. Nice and easy. just what I have.
>
> Don Har
> Corunna, MI
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
