| Re: [GMCnet] Stabilizer bar bushings [message #115575] |
Fri, 18 February 2011 17:54 |
KB
Messages: 1262
Registered: September 2009
Karma: 0
|
Senior Member |
|
|
The stabilizer bar bushings are Moog K5253
Yes, they are split so you don't have to slide them over the end.
You should probably also replace the end links which are K446 -- you'll need two of these, one for each end.
>
>
> Well, the investigation of my coach continues! While changing the oil today, I discovered that the right side bushing for the front stabilizer bar was completely missing!
>
> That might have added to my steering issues.
>
> My questions are:
>
> What bushings should I order (CAN I order?) Are they the same as the Toronado? Are there equivalent bushings available?
>
> Second, As the end of the stabilizer bar is wider than the bar itself, I assume that these bushings don't have to slide over the end of the bar to their location under the bracket. Are these bushings split so that they can be fitted over the bar in place?
>
> Bob
> --
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Karen
1975 26'
San Jose, CA
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
