GMCforum: GMCnet » [GMCnet] vacuum connection

Home » Public Forums » GMCnet » [GMCnet] vacuum connection

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] vacuum connection [message #114838]

Sat, 12 February 2011 17:47

Gary Worobec

Messages: 867
Registered: May 2005

Karma: -1

Senior Member

Hi,

Just putting all the vacuum lines back on for the aluminum manifold and TBI. Does the transmission vacuum line go to the intake manifold or to a TBI/carb port? I forgot to mark it when I took it off.

Thanks

Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] vacuum connection [message #114839 is a reply to message #114838]

Sat, 12 February 2011 17:51

Gary Worobec

Messages: 867
Registered: May 2005

Karma: -1

Senior Member

OK, I'm high on brake cleaner. I found the picture and answered my own
question.

http://www.gmcmhphotos.com/photos/showphoto.php?photo=3343&cat=3323

Thanks

Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA

----- Original Message -----
From: "Gary Worobec" <gtw5@earthlink.net>
To: <gmclist@temp.gmcnet.org>
Sent: Saturday, February 12, 2011 3:47 PM
Subject: [GMCnet] vacuum connection

> Hi,
>
> Just putting all the vacuum lines back on for the aluminum manifold and
> TBI. Does the transmission vacuum line go to the intake manifold or to a
> TBI/carb port? I forgot to mark it when I took it off.
>
> Thanks
>
> Gary and Joanne Worobec
> 1973 GMC Glacier
> Anza, CA
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	and the total weight of a scrap GMC is......
Next Topic:	[GMCnet] Governor for TH-425

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 30 16:36:12 CDT 2024

Total time taken to generate the page: 0.01971 seconds