Home » Public Forums » GMCnet » how much aluminum in a GMC ?
how much aluminum in a GMC ? [message #110633] |
Mon, 03 January 2011 06:19 ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
hertfordnc
![United States United States](/GMCforum/images/flags/us.png) Messages: 1164 Registered: September 2009 Location: East NC
Karma: 0
|
Senior Member |
|
|
Would you believe, I still have the carcass in the back yard.
I was about to call a wrecker several times but then I'd get an email from someone asking about yet another part.
Many of those efforts fell through.
So there it sits, i can pay a tow truck top haul it 50 miles to the nearest recycling facility, or, i may persuade a local person to strip it down for the metal.
If i go that route then I can save the end caps for whoever might need them. (that I could hide in my yard indefinitely)
So, the key this decision is knowing the approximate weight of the metal.
Dave & Ellen Silva
Hertford, NC
76 Birchaven, 1-ton and other stuff
Currently planning the Great american Road Trip Summer 2021
It's gonna take a lot of Adderall to get this thing right.
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110637 is a reply to message #110633] |
Mon, 03 January 2011 07:33 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
![](http://gmc.mybirdfeeder.net/GMCforum/images/avatars/default_050.gif) |
USAussie
![United States United States](/GMCforum/images/flags/us.png) Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Dave,
I'm probably wrong but I could have sworn that someone mentioned that metal
recyclers weren't interested in the aluminum because of all the foam
insulation?
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of dave silva
Sent: Monday, January 03, 2011 11:19 PM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] how much aluminum in a GMC ?
Would you believe, I still have the carcass in the back yard.
I was about to call a wrecker several times but then I'd get an email from
someone asking about yet another part.
Many of those efforts fell through.
So there it sits, i can pay a tow truck top haul it 50 miles to the nearest
recycling facility, or, i may persuade a local person to strip it down for
the metal.
If i go that route then I can save the end caps for whoever might need them.
(that I could hide in my yard indefinitely)
So, the key this decision is knowing the approximate weight of the metal.
--
Dave & Ellen Silva
Happy owners of a 1972 Flatnose Revcon
Here by the generosity of the GMC community
http://www.davesilva.com/revcon
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110639 is a reply to message #110633] |
Mon, 03 January 2011 07:46 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
Mr ERFisher
![United States United States](/GMCforum/images/flags/us.png) Messages: 7117 Registered: August 2005
Karma: 2
|
Senior Member |
|
|
I am looking for a lighted GMC water pump switch ?
http://gmcmotorhome.info/PUMPSW.html
gene
On Mon, Jan 3, 2011 at 4:19 AM, dave silva <david.j.silva@uscg.mil> wrote:
>
>
>
> Would you believe, I still have the carcass in the back yard.
>
> I was about to call a wrecker several times but then I'd get an email from
> someone asking about yet another part.
>
> Many of those efforts fell through.
>
> So there it sits, i can pay a tow truck top haul it 50 miles to the nearest
> recycling facility, or, i may persuade a local person to strip it down for
> the metal.
>
> If i go that route then I can save the end caps for whoever might need
> them. (that I could hide in my yard indefinitely)
>
>
> So, the key this decision is knowing the approximate weight of the metal.
>
>
> --
> Dave & Ellen Silva
>
>
> Happy owners of a 1972 Flatnose Revcon
> Here by the generosity of the GMC community
> http://www.davesilva.com/revcon
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110640 is a reply to message #110637] |
Mon, 03 January 2011 07:54 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
hertfordnc
![United States United States](/GMCforum/images/flags/us.png) Messages: 1164 Registered: September 2009 Location: East NC
Karma: 0
|
Senior Member |
|
|
That is generally true but this is a depressed farming community.
There is no shortage of guys with a farmers work ethic who will cut that aluminum out and strip it clean for a few bucks.
If it only returns minimum wage I believe I can find someone willing to do it.
I just need to know the payoff.
Dave & Ellen Silva
Hertford, NC
76 Birchaven, 1-ton and other stuff
Currently planning the Great american Road Trip Summer 2021
It's gonna take a lot of Adderall to get this thing right.
|
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110802 is a reply to message #110665] |
Tue, 04 January 2011 16:22 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
midlf
![United States United States](/GMCforum/images/flags/us.png) Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
I'm also interested as I have a transmode that, most likely someday, will take this same path. Knowing the AL weight would be a good bit to know.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110807 is a reply to message #110802] |
Tue, 04 January 2011 17:13 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
hertfordnc
![United States United States](/GMCforum/images/flags/us.png) Messages: 1164 Registered: September 2009 Location: East NC
Karma: 0
|
Senior Member |
|
|
It is surprising, given the incredible amount of information (all of it vitally important) this group has on the GMC, that no one has ever needed to know the weight of the aluminium.
Does anyone want to offer a SWAG?
The price for dirty aluminum is $.47 at my local recycle place so if there's 1000 lb then i could probably find someone willing to spend a weekend cutting and stripping.
But if it's only 4 or 500 lb then I'll probably just pay to have it hauled.
Dave & Ellen Silva
Hertford, NC
76 Birchaven, 1-ton and other stuff
Currently planning the Great american Road Trip Summer 2021
It's gonna take a lot of Adderall to get this thing right.
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110810 is a reply to message #110807] |
Tue, 04 January 2011 17:55 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
Dave Mumert
![United States United States](/GMCforum/images/flags/us.png) Messages: 272 Registered: February 2004 Location: Olds, AB, Canada
Karma: 0
|
Senior Member |
|
|
Hi
.06 inch aluminum weighs about .85 pounds per square foot. I would guess
the skins are about 20 feet long. The roof is the largest piece at about 8
or 9 feet X 20 feet ( about 150 pounds). I would think the side skins would
be less than that because of the window openings. I don't have any data on
the thickness if the interior frame members but I would guess they do not
weigh more than the skins. If the floor beams are aluminum they would be
quite heavy.
I would guess the aluminum in the body would be under 600 pounds . Have no
idea about the floor beams.
The door, if you still have it, is probably worth more as a GMC part than
scrap.
Good luck
Dave
>
> It is surprising, given the incredible amount of information (all of it
vitally
> important) this group has on the GMC, that no one has ever needed to know
> the weight of the aluminium.
>
>
> Does anyone want to offer a SWAG?
>
>
> The price for dirty aluminum is $.47 at my local recycle place so if
there's 1000
> lb then i could probably find someone willing to spend a weekend cutting
and
> stripping.
>
> But if it's only 4 or 500 lb then I'll probably just pay to have it
hauled.
> --
> Dave & Ellen Silva
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110812 is a reply to message #110807] |
Tue, 04 January 2011 18:03 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
![](http://gmc.mybirdfeeder.net/GMCforum/images/avatars/default_050.gif) |
USAussie
![United States United States](/GMCforum/images/flags/us.png) Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Dave,
Think about it this way: I am 6' 1" tall and weigh 255 lbs (yes I'm
overweight)!
I reckon that that the 20' long aluminum body would weigh more than twice
what I weigh would it not? I reckon your swag of 1000 lbs is more like it
and probably that's low too.
I do think you're being optimistic when you note "i could probably find
someone willing to spend a weekend cutting and stripping." I don't think
that one person could strip the foam out AND cut the body up in a weekend. I
would suggest you mark off a couple of square feet and time how long it
takes to get the foam off to a level that the recycle place will accept.
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of dave silva
Sent: Wednesday, January 05, 2011 10:13 AM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] how much aluminum in a GMC ?
It is surprising, given the incredible amount of information (all of it
vitally important) this group has on the GMC, that no one has ever needed to
know the weight of the aluminium.
Does anyone want to offer a SWAG?
The price for dirty aluminum is $.47 at my local recycle place so if there's
1000 lb then i could probably find someone willing to spend a weekend
cutting and stripping.
But if it's only 4 or 500 lb then I'll probably just pay to have it hauled.
--
Dave & Ellen Silva
Happy owners of a 1972 Flatnose Revcon
Here by the generosity of the GMC community
http://www.davesilva.com/revcon
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110831 is a reply to message #110637] |
Tue, 04 January 2011 20:11 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
![](http://gmc.mybirdfeeder.net/GMCforum/images/avatars/default_102.gif) |
mike miller
![United States United States](/GMCforum/images/flags/us.png) Messages: 3576 Registered: February 2004 Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
Robert Mueller wrote on Mon, 03 January 2011 05:33 | I'm probably wrong but I could have sworn that someone mentioned that metal
recyclers weren't interested in the aluminum because of all the foam
insulation?
|
I understand that the insulation is quite flammable. If the recyclers do not want the skin due to the insulation stuck to it, couldn't it be removed by a "controlled burn" ??? (After separation from the Fiberglass parts of course.)
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110838 is a reply to message #110831] |
Tue, 04 January 2011 20:40 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
![](http://gmc.mybirdfeeder.net/GMCforum/images/avatars/default_050.gif) |
USAussie
![United States United States](/GMCforum/images/flags/us.png) Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Mike,
I too remember reading that the insulation was extremely flammable.
Did (or didn't) someone also mention that when it burned it gave off
phosgene gas?
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Mike Miller
Sent: Wednesday, January 05, 2011 1:12 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] how much aluminum in a GMC ?
I understand that the insulation is quite flammable. If the recyclers do
not want the skin due to the insulation stuck to it, couldn't it be removed
by a "controlled burn" ??? (After separation from the Fiberglass parts of
course.)
--
Mike Miller
#01 - `73 26' X Painted D. "The Spare"
#02 - `78 23' Birchaven Rear Bath "The User"
#03 - `77 23' Birchaven Side Bath "The Keeper"
Hillsboro, OR
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110858 is a reply to message #110838] |
Tue, 04 January 2011 22:52 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
Adrien G.
![United States United States](/GMCforum/images/flags/us.png) Messages: 474 Registered: May 2008 Location: Burns Flat, OK 73624
Karma: 1
|
Senior Member |
|
|
Robert,
Beside the toxic fumes, would enough heat be generated to melt the skin adhesive, or maybe melt the skin itself.
Would it be a reenactment of the Hindenburgh?
Adrien & Jenny Genesoto
75 Glenbrook (26-3) Mods LS3.70 FD / Reaction Sys / 80mm Front&Intermidiate / Hydroboost / 16" Tires / Frame Rebuild / Interior Rebuild
Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110959 is a reply to message #110858] |
Wed, 05 January 2011 19:10 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
![](http://gmc.mybirdfeeder.net/GMCforum/images/avatars/default_050.gif) |
USAussie
![United States United States](/GMCforum/images/flags/us.png) Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Adrien,
First of all I would like to note that I only "heard" that the foam would
burn very quickly and produce phosgene gas, I have not taken the time to
verify that. If I wanted to burn it out it would behoove me to do so lest I;
or anyone I employed; be injured or killed burning it out.
I have stripped a couple of patches inside The Blue Streak manually and it
is a PITA job!
IIRC the skin adhesive is 3M-2216 and once again I don't know if it would
melt if the foam were burned off.
Nah, I don't think a GMC would go up as quick as the Hindenburg did down in
Lakehurst! For the hell of it I Googled "Hindenburg" and found the Wikipedia
entry which is very interesting.
http://en.wikipedia.org/wiki/Hindenburg_disaster
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Adrien Genesoto
Sent: Wednesday, January 05, 2011 3:53 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] how much aluminum in a GMC ?
Robert,
Beside the toxic fumes, would enough heat be generated to melt the skin
adhesive, or maybe melt the skin itself.
Would it be a reenactment of the Hindenburgh?
--
Adrien
75 Glenbrook
Yuba City,Ca.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110974 is a reply to message #110959] |
Wed, 05 January 2011 20:36 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
![](http://gmc.mybirdfeeder.net/GMCforum/images/avatars/default_102.gif) |
mike miller
![United States United States](/GMCforum/images/flags/us.png) Messages: 3576 Registered: February 2004 Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
Robert Mueller wrote on Wed, 05 January 2011 17:10 |
First of all I would like to note that I only "heard" that the foam would
burn very quickly and produce phosgene gas, I have not taken the time to
verify that. If I wanted to burn it out it would behoove me to do so lest I;
or anyone I employed; be injured or killed burning it out.
I have stripped a couple of patches inside The Blue Streak manually and it
is a PITA job! ...
|
1. -- Yes, find out what the by-products (and concentrations) are before lighting the foam.
2. -- There is a difference between the foam burning in an enclosed coach and burning the foam off "disjointed" panels laying foam up, in open air.
3. -- Sad to see (or hear of) any coach being scrapped... But recycling is good.
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #110992 is a reply to message #110974] |
Wed, 05 January 2011 21:59 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
![](http://gmc.mybirdfeeder.net/GMCforum/images/avatars/default_050.gif) |
USAussie
![United States United States](/GMCforum/images/flags/us.png) Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Mike,
Once again I have no idea whether or not the burning foam really gives off
phosgene and if it does I have no idea what the level of phosgene it gives
off is. For all I know burning a patch a yard square might contaminate an
area large enough to encompass the area the person doing the burning might
be standing.
I do know that when I took some of the foam I stripped off the area behind
the fridge of The Blue Streak, laid it on the ground outside the workshop
and tried to ignite them. I couldn't get it to light. I reported this to the
GMCnet and was advised to try it with the foam vertical with the ignition
source at the bottom. I was assured that if I did it would light and burn
rapidly. I did not try it as the only vertical sections were still on the
walls inside! ;-)
To me the bottom line for me is that if someone were to be injured by
burning foam off a coach that I was scrapping I would feel responsible. If
the person that was injured felt that way too I could open myself to
litigation. Before I allowed them to burn it off I would be 110% sure that
burning it was not dangerous to life or limb.
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Mike Miller
Sent: Thursday, January 06, 2011 1:36 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] how much aluminum in a GMC ?
1. -- Yes, find out what the by-products (and concentrations) are before
lighting the foam.
2. -- There is a difference between the foam burning in an enclosed coach
and burning the foam off "disjointed" panels laying foam up, in open air.
3. -- Sad to see (or hear of) any coach being scrapped... But recycling is
good.
--
Mike Miller
#01 - `73 26' X Painted D. "The Spare"
#02 - `78 23' Birchaven Rear Bath "The User"
#03 - `77 23' Birchaven Side Bath "The Keeper"
Hillsboro, OR
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #111007 is a reply to message #110992] |
Thu, 06 January 2011 06:19 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
hertfordnc
![United States United States](/GMCforum/images/flags/us.png) Messages: 1164 Registered: September 2009 Location: East NC
Karma: 0
|
Senior Member |
|
|
On other forums i participate in people get really testy when you stray off topic.
I love how this group has no such constraints. It's a lot more like a bunch of guys in a bar, just letting the conversation go where it will.
I live in a fairly remote area, my neighbors burn trash in barrels all the time and occasionally you get a whiff of something very inorganic.
This weekend I'll do a test piece, remove and burn, and see what the results are.
I would never let someone else burn the stuff off for me.
Thanks
Dave & Ellen Silva
Hertford, NC
76 Birchaven, 1-ton and other stuff
Currently planning the Great american Road Trip Summer 2021
It's gonna take a lot of Adderall to get this thing right.
|
|
|
Re: [GMCnet] how much aluminum in a GMC ? [message #111015 is a reply to message #111007] |
Thu, 06 January 2011 06:59 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) |
![](http://gmc.mybirdfeeder.net/GMCforum/images/avatars/default_050.gif) |
USAussie
![United States United States](/GMCforum/images/flags/us.png) Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Dave,
You could make a big contribution to the knowledge base of GMCnet if you
film the burning.
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of dave silva
Sent: Thursday, January 06, 2011 11:20 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] how much aluminum in a GMC ?
On other forums i participate in people get really testy when you stray off
topic.
I love how this group has no such constraints. It's a lot more like a bunch
of guys in a bar, just letting the conversation go where it will.
I live in a fairly remote area, my neighbors burn trash in barrels all the
time and occasionally you get a whiff of something very inorganic.
This weekend I'll do a test piece, remove and burn, and see what the results
are.
I would never let someone else burn the stuff off for me.
Thanks
--
Dave & Ellen Silva
Happy owners of a 1972 Flatnose Revcon
Here by the generosity of the GMC community
http://www.davesilva.com/revcon
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Goto Forum:
Current Time: Tue Aug 20 06:38:33 CDT 2024
Total time taken to generate the page: 0.01692 seconds
|