GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] ENGINE OIL COOLING LINE HOSES
[GMCnet] ENGINE OIL COOLING LINE HOSES [message #109178] Mon, 20 December 2010 18:22 Go to next message
Charles Aulgur is currently offline  Charles Aulgur   United States
Messages: 78
Registered: March 2006
Karma: 0
Member
When I first got a GMC in 1985 one of the major things talked about
at rallies was the need to replace the old engine cooling line hoses
as their failure was one of the major things causing GMC fires. I
haven't hear this even being discussed with the new owners any more.
Is it no longer considered to be something new owners should be
concerned with?

Chuck Aulgur
Just wondering
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109186 is a reply to message #109178] Mon, 20 December 2010 19:06 Go to previous messageGo to next message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
Chuck, first thing I replaced on our coach in 04. I suspect most have been replaced by older owners but you are right. New owners need to check those.
Dan


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109187 is a reply to message #109186] Mon, 20 December 2010 19:16 Go to previous messageGo to next message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
Senior Member
I lot of us have replaced ours with JR's teflon / Stainless lines. They will last a lifetime so it is no longer a concern to a lot of us.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109189 is a reply to message #109187] Mon, 20 December 2010 19:20 Go to previous messageGo to next message
k2gkk is currently offline  k2gkk   United States
Messages: 4452
Registered: November 2009
Karma: -8
Senior Member

JR ? ? ?

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~



> To: gmclist@temp.gmcnet.org
> From: n9cv@comcast.net
> Date: Mon, 20 Dec 2010 19:16:27 -0600
> Subject: Re: [GMCnet] ENGINE OIL COOLING LINE HOSES
>
> I lot of us have replaced ours with JR's teflon / Stainless lines. They will last a lifetime so it is no longer a concern to a lot of us.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109198 is a reply to message #109189] Mon, 20 December 2010 20:30 Go to previous messageGo to next message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
Senior Member
I had mine made locally. The guy said I would never need any new ones as these are some kind of heavy hydraulic lines. Hope he is correct. I do keep my eyes on them.
Dan


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109201 is a reply to message #109189] Mon, 20 December 2010 20:47 Go to previous messageGo to next message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
Senior Member
k2gkk wrote on Mon, 20 December 2010 19:20


JR ? ? ?




http://www.bdub.net/slaton/


Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109202 is a reply to message #109178] Mon, 20 December 2010 20:48 Go to previous messageGo to next message
George Beckman is currently offline  George Beckman   United States
Messages: 1085
Registered: October 2008
Location: Colfax, CA
Karma: 11
Senior Member
Charles Aulgur wrote on Mon, 20 December 2010 16:22

When I first got a GMC in 1985 one of the major things talked about
at rallies was the need to replace the old engine cooling line hoses
as their failure was one of the major things causing GMC fires. I
haven't hear this even being discussed with the new owners any more.
Is it no longer considered to be something new owners should be
concerned with?

Chuck Aulgur
Just wondering
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist





'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109204 is a reply to message #109178] Mon, 20 December 2010 20:52 Go to previous messageGo to next message
George Beckman is currently offline  George Beckman   United States
Messages: 1085
Registered: October 2008
Location: Colfax, CA
Karma: 11
Senior Member
Charles Aulgur wrote on Mon, 20 December 2010 16:22

When I first got a GMC in 1985 one of the major things talked about
at rallies was the need to replace the old engine cooling line hoses
as their failure was one of the major things causing GMC fires. I
haven't hear this even being discussed with the new owners any more.
Is it no longer considered to be something new owners should be
concerned with?

Chuck Aulgur
Just wondering
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Glad this topic came up. I cut my '74 lines to put in a cooler and those suckers are tough. I tried pruning sheers, then huge bolt cutters and finally hacked my way through with a hack saw. I never dreamed one could leak.


'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109208 is a reply to message #109204] Mon, 20 December 2010 21:00 Go to previous messageGo to next message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
Senior Member
George Beckman wrote on Mon, 20 December 2010 20:52


Glad this topic came up. I cut my '74 lines to put in a cooler and those suckers are tough. I tried pruning sheers, then huge bolt cutters and finally hacked my way through with a hack saw. I never dreamed one could leak.


That is the problem. They are suppose to flex to absorb the difference in engine movement (vibration) and the fixed frame mounted radiator. If they are hard eventually the vibration with cause them to leak. Especially at the joint between the hose and the steel pipe or fitting.

Replace them.


Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109210 is a reply to message #109178] Mon, 20 December 2010 21:02 Go to previous messageGo to next message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
Senior Member

Charles Aulgur wrote on Mon, 20 December 2010 17:22

When I first got a GMC in 1985 one of the major things talked about
at rallies was the need to replace the old engine cooling line hoses
as their failure was one of the major things causing GMC fires. I
haven't hear this even being discussed with the new owners any more.
Is it no longer considered to be something new owners should be
concerned with?

Chuck Aulgur
Just wondering
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist




A guy I know here in Tucson, who is (was) rebuilding a coach, checked his. They looked OK and didn't leak. He decided to change them anyway and when he started to work on them, they crumbled in his hands.

One of the first things I did was to replace those hoses too. Got the ones JR makes from Jim K. they had been replaced at some point in the past with hydraulic hoses and probably would have lasted forever, but I wasn't taking any chances.


Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109211 is a reply to message #109178] Mon, 20 December 2010 21:06 Go to previous messageGo to next message
RadioActiveGMC is currently offline  RadioActiveGMC   United States
Messages: 1020
Registered: November 2010
Location: Hot AZ desert
Karma: 0
Senior Member
Oh no not something else to investigate! Ok where are these and what should I be looking for? I just looked at the link posted above. I think I can find them actually. How do you know if they need to be repalced?

***"Gettin There"-1973 23' Sequoia- Michael, Onans smell, "Go solar/wind power!"

[Updated on: Mon, 20 December 2010 21:09]

Report message to a moderator

Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109214 is a reply to message #109211] Mon, 20 December 2010 21:24 Go to previous messageGo to next message
C Boyd is currently offline  C Boyd   United States
Messages: 2629
Registered: April 2006
Karma: 18
Senior Member
Mr.RadioActive wrote on Mon, 20 December 2010 22:06

Oh no not something else to investigate! Ok where are these and what should I be looking for? I just looked at the link posted above. I think I can find them actually. How do you know if they need to be repalced?







Oil cooler lines (2). run from the oil filter adapter to the radiator. If the look fuzzy anywhere, replace. If they are hard, replace. If you have any doubts, replace them.


C. Boyd
76 Crestmont
East Tennessee
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109215 is a reply to message #109178] Mon, 20 December 2010 21:26 Go to previous messageGo to next message
RadioActiveGMC is currently offline  RadioActiveGMC   United States
Messages: 1020
Registered: November 2010
Location: Hot AZ desert
Karma: 0
Senior Member
Ok then I do know where they go. I've seen them. Mine I notice weep fluid at the radiator.

***"Gettin There"-1973 23' Sequoia- Michael, Onans smell, "Go solar/wind power!"
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109217 is a reply to message #109178] Mon, 20 December 2010 22:20 Go to previous messageGo to next message
idrob is currently offline  idrob   United States
Messages: 645
Registered: January 2005
Location: Central Idaho
Karma: 0
Senior Member
Charles Aulgur wrote on Mon, 20 December 2010 16:22

When I first got a GMC in 1985 one of the major things talked about
at rallies was the need to replace the old engine cooling line hoses
as their failure was one of the major things causing GMC fires. I
haven't hear this even being discussed with the new owners any more.
Is it no longer considered to be something new owners should be
concerned with?

Chuck Aulgur
Just wondering




One of the first traumas I had with my GMC was a burst oil cooler hose.

http://www.gmcmhphotos.com/photos/showgallery.php?cat=4028

I replaced them with ones made locally, but then picked up a set of JR's at the Rapid City Rally. Never did put them in, and sold them with the coach. I wonder if Mitch installed them... They are a beautiful piece of work, like JRs' air valves.



Rob Allen
former owner of '76 x-PB
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109229 is a reply to message #109189] Tue, 21 December 2010 05:47 Go to previous messageGo to next message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma: 0
Senior Member
JR Slaten makes and sells very nice replacement oil cooler lines that go
between the block adapter and the radiator.

On Mon, Dec 20, 2010 at 6:20 PM, D C *Mac* Macdonald <k2gkk@hotmail.com>wrote:

>
> JR ? ? ?
>
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ~~ ~ D C "Mac" Macdonald ~ ~~
> ~ ~ Amateur Radio - K2GKK ~ ~
> ~ ~ USAF and FAA, Retired ~ ~
> ~ ~ ~ Oklahoma City, OK ~ ~ ~
> ~~ ~ ~ "The Money Pit" ~ ~ ~~
> ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> ~ www.gmcmhphotos.com/okclb ~
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
>
>
>
> > To: gmclist@temp.gmcnet.org
> > From: n9cv@comcast.net
> > Date: Mon, 20 Dec 2010 19:16:27 -0600
> > Subject: Re: [GMCnet] ENGINE OIL COOLING LINE HOSES
> >
> > I lot of us have replaced ours with JR's teflon / Stainless lines. They
> will last a lifetime so it is no longer a concern to a lot of us.
> > --
> > Ken Burton - N9KB
> > 76 Palm Beach
> > Hebron, Indiana
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109230 is a reply to message #109229] Tue, 21 December 2010 05:54 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
good morning

Hope you and all the GMCnet folks have a good Holidays season

gene



On Tue, Dec 21, 2010 at 3:47 AM, Steven Ferguson <botiemad11@gmail.com>wrote:

> JR Slaten makes and sells very nice replacement oil cooler lines that go
> between the block adapter and the radiator.
>
> On Mon, Dec 20, 2010 at 6:20 PM, D C *Mac* Macdonald <k2gkk@hotmail.com
> >wrote:
>
> >
> > JR ? ? ?
> >
> > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > ~~ ~ D C "Mac" Macdonald ~ ~~
> > ~ ~ Amateur Radio - K2GKK ~ ~
> > ~ ~ USAF and FAA, Retired ~ ~
> > ~ ~ ~ Oklahoma City, OK ~ ~ ~
> > ~~ ~ ~ "The Money Pit" ~ ~ ~~
> > ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> > ~ www.gmcmhphotos.com/okclb ~
> > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> >
> >
> >
> > > To: gmclist@temp.gmcnet.org
> > > From: n9cv@comcast.net
> > > Date: Mon, 20 Dec 2010 19:16:27 -0600
> > > Subject: Re: [GMCnet] ENGINE OIL COOLING LINE HOSES
> > >
> > > I lot of us have replaced ours with JR's teflon / Stainless lines. They
> > will last a lifetime so it is no longer a concern to a lot of us.
> > > --
> > > Ken Burton - N9KB
> > > 76 Palm Beach
> > > Hebron, Indiana
> > > _______________________________________________
> > > GMCnet mailing list
> > > List Information and Subscription Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Steve Ferguson
> Sierra Vista, AZ
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109235 is a reply to message #109230] Tue, 21 December 2010 06:19 Go to previous messageGo to next message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma: 0
Senior Member
BACKATCHA Gene.
So far, it's been really good. Nancy had gone to FL earlier this month and
got wrapped up in buying a house in Titusville. (Her sister recently bought
a winter home there and spread the excitement to Nancy). To my absolute
relief, she backed out when the inspection report was faxed to us last
week. Whew? I do not want to take care of two homes at my age. Especially
one in FL with all the problems associated with a warm humid climate. Life
is good!

Question: Why are you guys doing so many control arms?

On Tue, Dec 21, 2010 at 4:54 AM, Mr.erf ERFisher <mr.erfisher@gmail.com>wrote:

> good morning
>
> Hope you and all the GMCnet folks have a good Holidays season
>
> gene
>
>
>
> On Tue, Dec 21, 2010 at 3:47 AM, Steven Ferguson <botiemad11@gmail.com
> >wrote:
>
> > JR Slaten makes and sells very nice replacement oil cooler lines that go
> > between the block adapter and the radiator.
> >
> > On Mon, Dec 20, 2010 at 6:20 PM, D C *Mac* Macdonald <k2gkk@hotmail.com
> > >wrote:
> >
> > >
> > > JR ? ? ?
> > >
> > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > > ~~ ~ D C "Mac" Macdonald ~ ~~
> > > ~ ~ Amateur Radio - K2GKK ~ ~
> > > ~ ~ USAF and FAA, Retired ~ ~
> > > ~ ~ ~ Oklahoma City, OK ~ ~ ~
> > > ~~ ~ ~ "The Money Pit" ~ ~ ~~
> > > ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> > > ~ www.gmcmhphotos.com/okclb ~
> > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > >
> > >
> > >
> > > > To: gmclist@temp.gmcnet.org
> > > > From: n9cv@comcast.net
> > > > Date: Mon, 20 Dec 2010 19:16:27 -0600
> > > > Subject: Re: [GMCnet] ENGINE OIL COOLING LINE HOSES
> > > >
> > > > I lot of us have replaced ours with JR's teflon / Stainless lines.
> They
> > > will last a lifetime so it is no longer a concern to a lot of us.
> > > > --
> > > > Ken Burton - N9KB
> > > > 76 Palm Beach
> > > > Hebron, Indiana
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > List Information and Subscription Options:
> > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > _______________________________________________
> > > GMCnet mailing list
> > > List Information and Subscription Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Steve Ferguson
> > Sierra Vista, AZ
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109245 is a reply to message #109235] Tue, 21 December 2010 07:08 Go to previous messageGo to next message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
Senior Member
Steve,

This is funny! When Helen and I retired to Australia she noted that she
wanted and old Aussie farm house with the veranda all the way around "down
the coast" to restore. I told her that I restored one house (our townhouse
in Sydney was built in 1876) and wasn't going through that pain again so I'd
build her a brand new one in the style of the late 1800's. Off we went
looking for 5 - 10 acres. I could build her house and a BIG shed (Aussie for
workshop/garage) for me. We found the property and were negotiating the
price when I mentioned that the area was ideal as we could take the train up
to Sydney when we wanted to visit the "big smoke." She then told me that she
didn't want to live there just go there on the weekends. I told her that
there was no bloody way I was maintaining two houses and that if she wanted
to head for the south coast for a weekend she could make reservations at a
hotel or B&B! That was eight years ago, guess how many times we've been to
the south coast. ZIP!

Regards,
Rob M.
USAussie - Downunder

-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Steven Ferguson
Sent: Tuesday, December 21, 2010 11:19 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] ENGINE OIL COOLING LINE HOSES

BACKATCHA Gene.
So far, it's been really good. Nancy had gone to FL earlier this month and
got wrapped up in buying a house in Titusville. (Her sister recently bought
a winter home there and spread the excitement to Nancy). To my absolute
relief, she backed out when the inspection report was faxed to us last
week. Whew? I do not want to take care of two homes at my age. Especially
one in FL with all the problems associated with a warm humid climate. Life
is good!

Question: Why are you guys doing so many control arms?

--
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426
Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109251 is a reply to message #109245] Tue, 21 December 2010 07:49 Go to previous messageGo to next message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma: 0
Senior Member
Like you, I am a happy camper.
It just didn't make any sense to me to jump in the motorhome (house on
wheels), drive all the way across country to another house, park the house
on wheels, move all the crap from the house on wheels into the 2nd fixed
house, then undo it all again in a couple months. ESPECIALLY when her
sister has a 4 bedroom house two miles down the road that we could stay in
for free or heaven forbid, we could even stay in the motorhome and have some
privacy and not have to be around her sister's dickhead husband.
Actually, I think she's a bit relieved once she cancelled the contract.
Fantastic deals on houses in FL right now. Some real beauties for
practically nothing. I like it where I am though.
Merry Christmas to you and Helen and hope you make it by here at least once
while your visiting the states.

On Tue, Dec 21, 2010 at 6:08 AM, Rob Mueller <robmueller@iinet.net.au>wrote:

> Steve,
>
> This is funny! When Helen and I retired to Australia she noted that she
> wanted and old Aussie farm house with the veranda all the way around "down
> the coast" to restore. I told her that I restored one house (our townhouse
> in Sydney was built in 1876) and wasn't going through that pain again so
> I'd
> build her a brand new one in the style of the late 1800's. Off we went
> looking for 5 - 10 acres. I could build her house and a BIG shed (Aussie
> for
> workshop/garage) for me. We found the property and were negotiating the
> price when I mentioned that the area was ideal as we could take the train
> up
> to Sydney when we wanted to visit the "big smoke." She then told me that
> she
> didn't want to live there just go there on the weekends. I told her that
> there was no bloody way I was maintaining two houses and that if she wanted
> to head for the south coast for a weekend she could make reservations at a
> hotel or B&B! That was eight years ago, guess how many times we've been to
> the south coast. ZIP!
>
> Regards,
> Rob M.
> USAussie - Downunder
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Steven Ferguson
> Sent: Tuesday, December 21, 2010 11:19 PM
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] ENGINE OIL COOLING LINE HOSES
>
> BACKATCHA Gene.
> So far, it's been really good. Nancy had gone to FL earlier this month
> and
> got wrapped up in buying a house in Titusville. (Her sister recently
> bought
> a winter home there and spread the excitement to Nancy). To my absolute
> relief, she backed out when the inspection report was faxed to us last
> week. Whew? I do not want to take care of two homes at my age.
> Especially
> one in FL with all the problems associated with a warm humid climate. Life
> is good!
>
> Question: Why are you guys doing so many control arms?
>
> --
> Steve Ferguson
> Sierra Vista, AZ
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] ENGINE OIL COOLING LINE HOSES [message #109253 is a reply to message #109198] Tue, 21 December 2010 08:02 Go to previous messageGo to previous message
John Sharpe is currently offline  John Sharpe   United States
Messages: 489
Registered: February 2006
Location: Texas
Karma: 1
Senior Member
Quote:

...... some kind of heavy hydraulic lines...../...they had been replaced at some point in the past with hydraulic hoses and probably would have lasted forever, but I wasn't taking any chances.


When I was having replacements made-up they kept talking about how much pressure they would hold. I wasn't concerned how many 1000# they would hold. I was concerned with the temperature rating of the hose. When I started investigating that, I found that the hose they were going to use had a max temp rating of around 200 degrees. Had to look a while to find a hose with a rating of 300 degrees and the pickings were slim. I could not identify any with any higher rating than 300 degrees. Beware if you are having hoses made-up that suitable hose is being used. Or just buy from one of our vendors because they know. Twisted Evil


John Sharpe
Humble,TX
'78 Eleganza TBI
'89 Spectrum 2000 MPI V-10
'40 Ford Panel Delivery TPI
johnasharpe@gmail.com
Previous Topic: A cute "how Santa does it", IT and Engineers point of view
Next Topic: Re: [GMCnet] Headliner Quality
Goto Forum:
  


Current Time: Tue Nov 19 16:26:20 CST 2024

Total time taken to generate the page: 0.01436 seconds