Home » Public Forums » GMCnet » [GMCnet] Theft
| [GMCnet] Theft [message #106848] |
Fri, 26 November 2010 19:44  |
kenneth hugelier
Messages: 89
Registered: August 2008
Karma: 0
|
Member |
|
|
I am almost embarrassed to report that my coach got broken into while in my drive about a week ago. I had it there to do a little work on it and to get it ready to go to Florida. I am still finding things missing. Apparently, I had not fully closed the rear drivers side window and that is how the buggers gained entry. Things such as small space heater, GPS, small electric frying pan, camera, etc, etc, etc have come up missing. However, one of the most important things was a small leather bag with a selection of 1/2" drive sockets along with a good ratchet wrench. I know that one of the deep sockets fit the lug nuts for the wheels, but since my PO put the little "kit" together, I am not sure of the rest. My question is; can anyone recommend the most used sizes I should buy to put together another kit? By choosing only the most used sizes, I save weight and room. I have a cheap 3/8" drive set that they did not take, so these would be for heavier use. As
I recall, there were about eight to ten sockets (perhaps a few more).
Thanks for any help you may offer.
ken hugelier 77 PB Det. Mich.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] Theft [message #106868 is a reply to message #106848] |
Sat, 27 November 2010 07:44  |
gmcrv1
Messages: 839
Registered: August 2007
Location: Memphis
Karma: -1
|
Senior Member |
|
|
Ken,
Sorry to hear of your misfortune. I had a similar thing to happen to me
years ago. They broke the vent window on my pickup truck and stole a fairly
well stocked tool box.. It took me a couple of years to realize all the
stuff that was missing.
For replacement - if you have the 1/4, 3/8 and 1/2 ratchets you can get
replacement sockets by the piece at Sears, NAPA etc. By the time you do
that you can get a set of 1/2" Stanley or Husky 6 point impact sockets -
which till take all the abuse you can give them for $20-$25. Both have a
lifetime warranty. Stanley makes similar set and is available at Wally
World for the same money. Try Home Depot and Lowes, both have sets on floor
displays as you enter the store. I was told by a friend that retired as the
northeast regional manager for Snap On Tools that the traditional sockets,
wrenches etc are made in Kenosha, WI (Snap On). This does not include their
vice grips and lower line tools.
Just take a look at the individual prices vs. a set. My son recently bought
two Craftsman combination wrenches at separate trips to Sears. One wrench
was $9 and the other was $12. He could have bought them in a set with other
wrenches for $23.99.
My two cents,
*Happy Motoring!*
*
*
*Tom Eckert N2VWN*
73 Glacier
Oakland, TN
On Fri, Nov 26, 2010 at 7:44 PM, ken hugelier <kahugelier@sbcglobal.net>wrote:
> I am almost embarrassed to report that my coach got broken into while in my
> drive about a week ago. I had it there to do a little work on it and to get
> it ready to go to Florida. I am still finding things missing. Apparently, I
> had not fully closed the rear drivers side window and that is how the
> buggers gained entry. Things such as small space heater, GPS, small electric
> frying pan, camera, etc, etc, etc have come up missing. However, one of the
> most important things was a small leather bag with a selection of 1/2" drive
> sockets along with a good ratchet wrench. I know that one of the deep
> sockets fit the lug nuts for the wheels, but since my PO put the little
> "kit" together, I am not sure of the rest. My question is; can anyone
> recommend the most used sizes I should buy to put together another kit? By
> choosing only the most used sizes, I save weight and room. I have a cheap
> 3/8" drive set that they did not take, so these would be for heavier use. As
> I recall, there were about eight to ten sockets (perhaps a few more).
> Thanks for any help you may offer.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ken hugelier 77 PB Det. Mich.
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Theft [message #106869 is a reply to message #106848] |
Sat, 27 November 2010 08:09 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Ken,
Sorry to hear of your loss. I know it must be especially frustrating
knowing you helped by not latching the window. The GMC seems pretty secure
against the "casual" thief who's unwilling to smash glass. We had an
attempted break-in several years ago in a motel parking lot -- he tried to
force the entry latch open. Bent the handle out pretty severely without
getting the door open. I haven't YET bent it back perfectly; it doesn't lay
flat within the bezel -- a mild reminder to always lock up.
Sorry I can't help with a GMC-required tool list. For a while I attempted
to build such a list. Even put out a clipboard at Bean Station during one
of our work rallies with a request that everyone mark the list each time
they used a different tool. None of that worked out well. The
barely-readable grease--stained lists seemed to list everything in the shop!
Faced with starting from scratch, for a dedicated-vehicle kit, as opposed to
a shop kit, I'd visit Harbor Freight. They have some pretty good
combination wrench and 3/8" socket sets at absurdly low prices. To those
and a good set of screwdrivers, I'd add a 3/4" breaker bar with 1-1/16" and
1-1/4" (IIRC that's the front axle nut size). A few other specialty items
will catch your eye, like socket extensions, adjustable wrenches, and
pliers. You can build a pretty complete kit for <$100.
Ken H.
On Fri, Nov 26, 2010 at 8:44 PM, ken hugelier <kahugelier@sbcglobal.net>wrote:
> I am almost embarrassed to report that my coach got broken into while in my
> drive about a week ago...
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
|
| Re: [GMCnet] Theft [message #106879 is a reply to message #106848] |
Sat, 27 November 2010 10:47 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Any standard coach can be opened by going through the windows.
All one needs to do is push the inner glass into the coach , then
slide the other. The latch will not function at tat point.
I feel lit safer with the New Framless curved glass as the opening is
small and the glass doer not slide.
On Fri, Nov 26, 2010 at 5:44 PM, ken hugelier <kahugelier@sbcglobal.net> wrote:
> I am almost embarrassed to report that my coach got broken into while in my drive about a week ago. I had it there to do a little work on it and to get it ready to go to Florida. I am still finding things missing. Apparently, I had not fully closed the rear drivers side window and that is how the buggers gained entry. Things such as small space heater, GPS, small electric frying pan, camera, etc, etc, etc have come up missing. However, one of the most important things was a small leather bag with a selection of 1/2" drive sockets along with a good ratchet wrench. I know that one of the deep sockets fit the lug nuts for the wheels, but since my POÂ put the little "kit" together, I am not sure of the rest. My question is; can anyone recommend the most used sizes I should buy to put together another kit? By choosing only the most used sizes, I save weight and room. I have a cheap 3/8" drive set that they did not take, so these would be for heavier use. As
> Â I recall, there were about eight to ten sockets (perhaps a few more).
> Thanks for any help you may offer.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ken hugelier  77 PB  Det. Mich.
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Theft [message #106885 is a reply to message #106879] |
Sat, 27 November 2010 12:14 |
 |
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
| jimk wrote on Sat, 27 November 2010 08:47 |
Any standard coach can be opened by going through the windows.
All one needs to do is push the inner glass into the coach , then
slide the other. The latch will not function at tat point.
...
|
The PO of my '78 Birch made some wooden sticks, sized to fit in the grooves that the windows slide in. When left in the window frame, they keep the windows from opening. (Works like a broomstick in a sliding patio door.) He made them slightly short, so the window can be left a little bit open for ventilation.
But if someone really wants in... they will get in.
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
| Re: [GMCnet] Theft [message #106911 is a reply to message #106885] |
Sat, 27 November 2010 20:22 |
shawnee
Messages: 422
Registered: February 2004
Location: NC
Karma: 0
|
Senior Member |
|
|
| mike miller wrote on Sat, 27 November 2010 13:14 |
| jimk wrote on Sat, 27 November 2010 08:47 |
Any standard coach can be opened by going through the windows.
All one needs to do is push the inner glass into the coach , then
slide the other. The latch will not function at tat point.
...
|
The PO of my '78 Birch made some wooden sticks, sized to fit in the grooves that the windows slide in. When left in the window frame, they keep the windows from opening. (Works like a broomstick in a sliding patio door.) He made them slightly short, so the window can be left a little bit open for ventilation.
But if someone really wants in... they will get in.
|
This reminds me of one time many years ago we were at Golby's place and walking by some coaches and I noticed several gashes in the GMC door. I ask Golby what happened to do this. He said someone tried to break into the coach and used an axe to try getting through the door, but finally gave up. Makes you wonder how smart people are when all he had to do is hit the glass in the door with one blow, unlock the door and walk right in.
Gene Dotson
74 Canyonlands
www.bdub.net/Motorhome_Enhancements New Windows and Aluminum Radiators
|
|
|
|
|
|
Goto Forum:
Current Time: Mon Nov 18 02:27:06 CST 2024
Total time taken to generate the page: 0.01146 seconds
|
GMCforum
Search
Help
Register
Login
Home
