GMCforum: GMCnet » Re: [GMCnet] Major Gas Leak at Onan, Help Me Stop It

Home » Public Forums » GMCnet » Re: [GMCnet] Major Gas Leak at Onan, Help Me Stop It

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Major Gas Leak at Onan, Help Me Stop It [message #105798]

Fri, 12 November 2010 16:06

rallymaster

Messages: 662
Registered: February 2004
Location: North Plains, ORYGUN

Karma: -4

Senior Member

What's the name of the Alcoa cleaner stuff that Chuck Boyd sells????

RonC

On Fri, 12 Nov 2010 15:33:55 -0600 Dan Gregg <gregg_dan@hotmail.com>
writes:
>
<SNIP>
Got 4 of the 7 Alcoas
> shining. The stuff that Chuck Boyd sells is great on old non
> maintained Alcoas. I love that stuff.
> Dan
> --
> Dan & Teri Gregg
>
> http://danandteri.blogspot.com/
>

Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Ron & Linda Clark
North Plains, ORYGUN
78 Eleganza II

Report message to a moderator

Re: [GMCnet] Major Gas Leak at Onan, Help Me Stop It [message #105801 is a reply to message #105798]

Fri, 12 November 2010 17:03

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Ron, it is not Alcoa cleaner. Jim K. has that. What I got from Chuck is aluminum polish. Email him. Maybe he still has some. What it works on is a wheel that has been neglected. I have tried the most expensive Mothers and it would not do anything for my wheels. The PO never did anything to the wheels and they were in bad shape. I worked on them for 5 years til Chuck sold me this stuff at Bean Station last year. I really had no faith in it but it works well, and easy on and off.
I have not tried the 3 step Alcoa stuff That Jim K. has. It may work well also.
5 down and two to go.
Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: [GMCnet] Major Gas Leak at Onan, Help Me Stop It [message #105803 is a reply to message #105801]

Fri, 12 November 2010 17:06

storm'n

Messages: 492
Registered: April 2007
Location: Ont. Can

Karma: 0

Senior Member

Pictures Dan. Before & after.

Ron, it is not Alcoa cleaner. Jim K. has that. What I got from Chuck is aluminum polish. Email him. Maybe he still has some. What it works on is a wheel that has been neglected. I have tried the most expensive Mothers and it would not do anything for my wheels. The PO never did anything to the wheels and they were in bad shape. I worked on them for 5 years til Chuck sold me this stuff at Bean Station last year. I really had no faith in it but it works well, and easy on and off.
I have not tried the 3 step Alcoa stuff That Jim K. has. It may work well also.
5 down and two to go.
Dan
--
Dan & Teri Gregg

http://danandteri.blogspot.com/

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Major Gas Leak at Onan, Help Me Stop It [message #105804 is a reply to message #105803]

Fri, 12 November 2010 17:19

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

I dont have any before I started using it last year. I keep them shined with it once or twice a year now. It was tough to get them shiny the first time. Took me two times on each wheel. Now I just rub on and get it black then wipe it off. My wheels will never look as good as many of yall's because they were so neglected in years past, but, they look really good.
Dan

Report message to a moderator

Re: [GMCnet] Major Gas Leak at Onan, Help Me Stop It [message #106728 is a reply to message #105801]

Thu, 25 November 2010 15:51

larry erd

Messages: 132
Registered: August 2010

Karma: 0

Senior Member

Try BUSHES Aluminum Polish, I've used it for years on Alcoa's.
larry erd
On Fri, Nov 12, 2010 at 6:03 PM, Dan Gregg <gregg_dan@hotmail.com> wrote:

>
>
> Ron, it is not Alcoa cleaner. Jim K. has that. What I got from Chuck is
> aluminum polish. Email him. Maybe he still has some. What it works on is a
> wheel that has been neglected. I have tried the most expensive Mothers and
> it would not do anything for my wheels. The PO never did anything to the
> wheels and they were in bad shape. I worked on them for 5 years til Chuck
> sold me this stuff at Bean Station last year. I really had no faith in it
> but it works well, and easy on and off.
> I have not tried the 3 step Alcoa stuff That Jim K. has. It may work well
> also.
> 5 down and two to go.
> Dan
> --
> Dan & Teri Gregg
>
> http://danandteri.blogspot.com/
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	Canadian Police chase, no GMC's were caught
Next Topic:	Re: [GMCnet] Wheel alignment specs

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 26 23:21:23 CDT 2024

Total time taken to generate the page: 0.01691 seconds