Home » Public Forums » GMCnet » Broken thingy!!
| Broken thingy!! [message #105667] |
Thu, 11 November 2010 08:48  |
g.winger
Messages: 792
Registered: February 2008
Location: Warrenton,Missouri
Karma: 0
|
Senior Member |
|
|
|
Help,,,,my thingy broke. To and from DQ my dash air worked fine but I couln,t get it to change from the AC vents. Was worried because of the new comp, serp belt,,,etc. So on the cool morning we headed home we only needed a little heat and then I shut it off. Found the whole "multi' conector was off the back of the control head. Still leaked after hooking it up though. So I removed it and pulled it apart on the bench. The tiny clip that holds the spring,rubber, bacing plate together broke. Any where besides the mens mall????,,,thanks,,,PL
|
|
|
|
| Re: Broken thingy!! [message #105670 is a reply to message #105667] |
Thu, 11 November 2010 10:05  |
idrob
Messages: 645
Registered: January 2005
Location: Central Idaho
Karma: 0
|
Senior Member |
|
|
| g.winger wrote on Thu, 11 November 2010 06:48 |
Help,,,,my thingy broke. To and from DQ my dash air worked fine but I couln,t get it to change from the AC vents. Was worried because of the new comp, serp belt,,,etc. So on the cool morning we headed home we only needed a little heat and then I shut it off. Found the whole "multi' conector was off the back of the control head. Still leaked after hooking it up though. So I removed it and pulled it apart on the bench. The tiny clip that holds the spring,rubber, bacing plate together broke. Any where besides the mens mall????,,,thanks,,,PL
|
Are you talking about the vacuum control wafer on the dash HVAC control?
If so, it is exclusive to the GMC motorhome. You would have to get one from a salvage GMC, not the men's mall.
Rob Allen
former owner of '76 x-PB
|
|
|
|
| Re: [GMCnet] Broken thingy!! [message #105673 is a reply to message #105670] |
Thu, 11 November 2010 10:10 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
The pin is available
Gene
On Nov 11, 2010, at 8:05 AM, Rob Allen <profmail@wildblue.net> wrote:
>
>
> g.winger wrote on Thu, 11 November 2010 06:48
>> Help,,,,my thingy broke. To and from DQ my dash air worked fine but I couln,t get it to change from the AC vents. Was worried because of the new comp, serp belt,,,etc. So on the cool morning we headed home we only needed a little heat and then I shut it off. Found the whole "multi' conector was off the back of the control head. Still leaked after hooking it up though. So I removed it and pulled it apart on the bench. The tiny clip that holds the spring,rubber, bacing plate together broke. Any where besides the mens mall????,,,thanks,,,PL
>
>
> Are you talking about the vacuum control wafer on the dash HVAC control?
>
> If so, it is exclusive to the GMC motorhome. You would have to get one from a salvage GMC, not the men's mall.
>
>
>
> --
> Rob Allen
> former owner of '76 x-PB
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: Broken thingy!! [message #105674 is a reply to message #105667] |
Thu, 11 November 2010 10:11 |
g.winger
Messages: 792
Registered: February 2008
Location: Warrenton,Missouri
Karma: 0
|
Senior Member |
|
|
|
Rob, no,, I've got all the parts but its the "keeper' thats broke. Tried a small screw, double nutted but that does't work. won"t clear the sliding arm. Looks like a little fork with a flat head. White plastic. the keeper notches on the end broke off. Still don't know how it came unpluged though.,,,,PL
|
|
|
|
|
|
|
|
| Re: Broken thingy!! [message #105701 is a reply to message #105670] |
Thu, 11 November 2010 14:41 |
George Beckman
Messages: 1085
Registered: October 2008
Location: Colfax, CA
Karma: 11
|
Senior Member |
|
|
| idrob wrote on Thu, 11 November 2010 08:05 |
| g.winger wrote on Thu, 11 November 2010 06:48 |
Help,,,,my thingy broke. To and from DQ my dash air worked fine but I couln,t get it to change from the AC vents. Was worried because of the new comp, serp belt,,,etc. So on the cool morning we headed home we only needed a little heat and then I shut it off. Found the whole "multi' conector was off the back of the control head. Still leaked after hooking it up though. So I removed it and pulled it apart on the bench. The tiny clip that holds the spring,rubber, bacing plate together broke. Any where besides the mens mall????,,,thanks,,,PL
|
Are you talking about the vacuum control wafer on the dash HVAC control?
If so, it is exclusive to the GMC motorhome. You would have to get one from a salvage GMC, not the men's mall.
|
I was under the impression that the control pieces are used on other vehicles of the vintage, but the wafer is absolutely unique, because of our many doors and flaps.
'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
|
|
|
|
| Re: Broken thingy!! [message #105727 is a reply to message #105667] |
Thu, 11 November 2010 19:09 |
g.winger
Messages: 792
Registered: February 2008
Location: Warrenton,Missouri
Karma: 0
|
Senior Member |
|
|
|
Called Alex. They have the part. An 8-32 fits thru the hole well. grabbed a nylock and a plastik nut at the lumber yard on the way home. Had to grind down the head and file a new notch. Seals well except on defrost on the bench. Will install tomorrow. Thanks to all,,,,PL
|
|
|
|
Goto Forum:
Current Time: Fri Nov 01 07:25:46 CDT 2024
Total time taken to generate the page: 0.00801 seconds
|
GMCforum
Search
Help
Register
Login
Home
