[GMCnet] Used Howell TBI System & Haltech E6GM for sale [message #104923] |
Wed, 03 November 2010 11:41 |
Marcus McGee
Messages: 112 Registered: March 2004
Karma: 0
|
Senior Member |
|
|
Selling my used - about 6 to 7 K miles - Howell TBI system. It was
pulled from the engine about 3 years ago and since when I put the 455
back I am going to go TPI it is time to get it off the shelf. I have
all the components and wiring that came with it and the installation
manual. You will need a new O2 sensor as that was inadvertently shipped
when the headers were sold, the cable ties and the gaskets that came
with it . I am asking $800 for it and will entertain offers within
that range.
It was running well and had no problems with the system after the fuel
pressure was adjusted properly. Everything has been stored inside a
warehouse with heat so it is clean and decent
I can provide pictures upon request.
I also have a Haltech E6GM programmable fuel injection timing computer
with harness, software and all the hookups required to set it up and
program it. This can be used as a programmable replacement for the GM
computer for the Howell. It is a great unit and I believe the owner of
Caspro was playing with one on a TBI and found it a decent unit.
I am asking $400 for the Haltech. $450 to $550 seems to be about the
going price on the net
Description: http://www.wbdautomotive.com/e6gm.htm
Manual is here: http://www2.haltech.com.au/downloads/e6gm/e6gm_manual.pdf
Any interest contact me off net. Do not post questions and remarks to
the net so we keep traffic down.
Thanks
Marcus McGee
Trying to downsize the fleet.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|