Home » Public Forums » GMCnet » [GMCnet] Air Filter Gasket
|
|
| Re: [GMCnet] Air Filter Gasket [message #104144 is a reply to message #104142] |
Mon, 25 October 2010 13:37   |
k2gkk
Messages: 4452
Registered: November 2009
Karma: -8
|
Senior Member |
|
|
Hi, Ken.
Just finished looking at the URL below.
Regarding the gearing for the 3.21 drive
for the 65/66 Toro, a pinion of 14 and a
ring of 45 comes up with 3.2142857 on my
calculator. 13:42 gives 3.2307692. I'm
pretty confident that is the 45:14 combo.
* * * * * * * * * * * *
* D C "Mac" Macdonald *
* Amateur Radio K2GKK *
* USAF & FAA, Retired *
** Oklahoma City, OK **
* * * "Money Pit" * * *
* * ex-Palm Beach, 76 *
* * * * * * * * * * * *
----------------------------------------
> From: hend4800@bellsouth.net
> Date: Mon, 25 Oct 2010 14:25:18 -0400
> To: gmclist@temp.gmcnet.org
> Subject: [GMCnet] Air Filter Gasket
>
> After all the years I've disliked Quadrajet air filter gaskets, I finally
> did something about it. I've always had trouble keeping the flimsy little
> things in place and avoiding damage to them. So after trying several
> different variants, I made my own. Using the removable mounting ring from
> the Holley throttle body as a template I cut my own from a sheet of 3/16"
> thick rubber (hopefully oil resistant). It's thick enough to seal well and
> wide enough to retain its shape.
>
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=36513&title=new-air-filter-gasket&cat=5124
>
> Ken H.
> Americus, GA
> '76 X-Birchaven w/Cad500/Howell EFI+ & EBL
> www.gmcwipersetc.com
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Air Filter Gasket [message #104161 is a reply to message #104144] |
Mon, 25 October 2010 14:58 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Thanks, Mac, I'll update my spreadsheet and forward it to Mr.ERF in case he
wants to update the web site.
But I'm confused by "the URL below", which is the one I just posted about
air filter gaskets.
Ken H.
On Mon, Oct 25, 2010 at 2:37 PM, D C *Mac* Macdonald <k2gkk@hotmail.com>wrote:
>
> Hi, Ken.
>
> Just finished looking at the URL below.
> Regarding the gearing for the 3.21 drive
> for the 65/66 Toro, a pinion of 14 and a
> ring of 45 comes up with 3.2142857 on my
> calculator. 13:42 gives 3.2307692. I'm
> pretty confident that is the 45:14 combo.
>
> * * * * * * * * * * * *
> * D C "Mac" Macdonald *
> * Amateur Radio K2GKK *
> * USAF & FAA, Retired *
> ** Oklahoma City, OK **
> * * * "Money Pit" * * *
> * * ex-Palm Beach, 76 *
> * * * * * * * * * * * *
>
>
>
> ----------------------------------------
> > From: hend4800@bellsouth.net
> > Date: Mon, 25 Oct 2010 14:25:18 -0400
> > To: gmclist@temp.gmcnet.org
> > Subject: [GMCnet] Air Filter Gasket
> ...
>
>
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=36513&title=new-air-filter-gasket&cat=5124
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
|
| Re: [GMCnet] Air Filter Gasket [message #104172 is a reply to message #104161] |
Mon, 25 October 2010 16:06 |
k2gkk
Messages: 4452
Registered: November 2009
Karma: -8
|
Senior Member |
|
|
URL showed the gasket, but also had
what was claimed to be a video but
that was the chart for the ratios
and accompanying gear numbers.
Mac
* "An unarmed man can but flee *
* from evil. Evil can NEVER be *
* overcome by flight FROM it." *
----------------------------------------
> From: hend4800@bellsouth.net
> Date: Mon, 25 Oct 2010 15:58:01 -0400
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Air Filter Gasket
>
> Thanks, Mac, I'll update my spreadsheet and forward it to Mr.ERF in case he
> wants to update the web site.
>
> But I'm confused by "the URL below", which is the one I just posted about
> air filter gaskets.
>
> Ken H.
>
> On Mon, Oct 25, 2010 at 2:37 PM, D C *Mac* Macdonald wrote:
>
> >
> > Hi, Ken.
> >
> > Just finished looking at the URL below.
> > Regarding the gearing for the 3.21 drive
> > for the 65/66 Toro, a pinion of 14 and a
> > ring of 45 comes up with 3.2142857 on my
> > calculator. 13:42 gives 3.2307692. I'm
> > pretty confident that is the 45:14 combo.
> >
> > * * * * * * * * * * * *
> > * D C "Mac" Macdonald *
> > * Amateur Radio K2GKK *
> > * USAF & FAA, Retired *
> > ** Oklahoma City, OK **
> > * * * "Money Pit" * * *
> > * * ex-Palm Beach, 76 *
> > * * * * * * * * * * * *
> >
> >
> >
> > ----------------------------------------
> > > From: hend4800@bellsouth.net
> > > Date: Mon, 25 Oct 2010 14:25:18 -0400
> > > To: gmclist@temp.gmcnet.org
> > > Subject: [GMCnet] Air Filter Gasket
> > ...
> >
> >
> > http://www.gmcmhphotos.com/photos/showphoto.php?photo=36513&title=new-air-filter-gasket&cat=5124
> >
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Air Filter Gasket [message #104177 is a reply to message #104163] |
Mon, 25 October 2010 16:21 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
what spread sheet
where
what
when,
are you guys on the Forum or something?
gene
On Mon, Oct 25, 2010 at 1:22 PM, Ken Henderson <hend4800@bellsouth.net>wrote:
> It wasn't Mr.ERF who needed the update -- he only linked to GMCMHPhotos --
> I've sent it to bdub.
>
> Ken H.
>
> On Mon, Oct 25, 2010 at 3:58 PM, Ken Henderson <hend4800@bellsouth.net
> >wrote:
>
> > Thanks, Mac, I'll update my spreadsheet and forward it to Mr.ERF in case
> he
> > wants to update the web site.
> >
> >
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Air Filter Gasket [message #104209 is a reply to message #104172] |
Mon, 25 October 2010 18:32 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Mac,
OK, I see now. You visited some of the other entries in that "Odds'n'Ends"
album to find the overall gear ratios spreadsheet. I didn't even notice it
was there. And now I've asked bdub to update something I CAN do myself.
And we've confused the innocent bystander, Gene, who only put that link in
the Final Drives section of his web site. I'll probably screw up the link
if I do try to update the spreadsheet. Maybe it's not worth it to tell
people how many gear teeth there are in a 3.21 FD.
Ken H.
On Mon, Oct 25, 2010 at 5:06 PM, D C *Mac* Macdonald <k2gkk@hotmail.com>wrote:
>
> URL showed the gasket, but also had
> what was claimed to be a video but
> that was the chart for the ratios
> and accompanying gear numbers.
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
Goto Forum:
Current Time: Wed Oct 02 07:35:54 CDT 2024
Total time taken to generate the page: 0.01002 seconds
|
GMCforum
Search
Help
Register
Login
Home
