GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Front and Center
[GMCnet] Front and Center [message #104138] Mon, 25 October 2010 12:33 Go to next message
980 is currently offline  980   United States
Messages: 192
Registered: July 2010
Location: United States
Karma: -1
Senior Member
Hi everyone,

I'm looking for ideas for a center console for the flight deck. I'm a
GMRS and ham operator and I want to put some radio and navigation gear
in. Ultimately, I'd like to be able to turn the console to face either
seat since there's no other good position for a radio desk in the 26-3
layout. Also, this coach has a raised center in the engine hatch for
the full-height intake manifold below, so I'll need to deal with that, too.

I'd like to see what others have done.

--
1977 GMC ex-Palm Beach, 26-3
Treasure Island, CA
KC6VHG, KAG0675 "980"

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Front and Center [message #104151 is a reply to message #104138] Mon, 25 October 2010 13:52 Go to previous messageGo to next message
gmcrv1 is currently offline  gmcrv1   United States
Messages: 839
Registered: August 2007
Location: Memphis
Karma: -1
Senior Member
Desmond's GMC.

I am currently designing two different center consoles for the flight deck.
The first one is a basic console, cup holders, storage tray, side pouches
etc. Also will have a door facing the back of the coach. Top will support
a laptop.

The second one is still early in the design phase - but I am also a ham and
am trying to incorporate room for a dual bander and GMRS station equipment.
I would appreciate it if you would keep me in the loop. Currently I am the
one building the original style gun and fishing cabinets for the rear of the
coach. They are a,most an exact copy except they are made using furniture
grade hard woods and furniture grade oak plywood and trim. Even found
original style overhead hinges.

Thanks and good luck,

Tom Eckert N2VWN
73 Glacier (26-3)
Oakland, TN 38060

On Mon, Oct 25, 2010 at 12:33 PM, Desmond's GMC <980@opg.org> wrote:

> Hi everyone,
>
> I'm looking for ideas for a center console for the flight deck. I'm a
> GMRS and ham operator and I want to put some radio and navigation gear
> in. Ultimately, I'd like to be able to turn the console to face either
> seat since there's no other good position for a radio desk in the 26-3
> layout. Also, this coach has a raised center in the engine hatch for
> the full-height intake manifold below, so I'll need to deal with that, too.
>
> I'd like to see what others have done.
>
> --
> 1977 GMC ex-Palm Beach, 26-3
> Treasure Island, CA
> KC6VHG, KAG0675 "980"
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Front and Center [message #104154 is a reply to message #104138] Mon, 25 October 2010 14:06 Go to previous message
Bill Massey is currently offline  Bill Massey   United States
Messages: 201
Registered: March 2009
Karma: 0
Senior Member
How ya like this one?
http://www.gmcmhphotos.com/photos/showphoto.php?photo=9388&cat=3814
and
http://www.gmcmhphotos.com/photos/showphoto.php?photo=9386&cat=3814

Owner Peter Van Dyke somewhere in California

bdub


-----Original Message-----
From: On Behalf Of Desmond's GMC

I'm looking for ideas for a center console for the flight deck. I'm a GMRS
and ham operator and I want to put some radio and navigation gear in.
Ultimately, I'd like to be able to turn the console to face either seat
since there's no other good position for a radio desk in the 26-3 layout.
Also, this coach has a raised center in the engine hatch for the
full-height intake manifold below, so I'll need to deal with that, too.

I'd like to see what others have done.


_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Previous Topic: [GMCnet] Front sub frame
Next Topic: [GMCnet] Air Filter Gasket
Goto Forum:
  


Current Time: Wed Oct 02 01:31:37 CDT 2024

Total time taken to generate the page: 0.06174 seconds