| Q. for Rob M. [message #103039] |
Fri, 15 October 2010 05:52  |
g.winger
Messages: 792
Registered: February 2008
Location: Warrenton,Missouri
Karma: 0
|
Senior Member |
|
|
|
Rob, what rockers are you going to use. Stock or potters ajustable??? One of the Potter rockers made by Probe failed on me and bent an exhaust valve.,,,PL
|
|
|
|
| Re: [GMCnet] Q. for Rob M. [message #103051 is a reply to message #103039] |
Fri, 15 October 2010 09:52  |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Paul,
I bought a set of aluminum Ford 1.6 rockers off eBay for around a $100 and
will make my own shafts and mounting standoffs.
I looked at the two types Jerry sells and felt they were over kill and over
priced for our application.
As a guesstimate I reckoned that this engine wouldn't see more than 3500 rpm
with the 3.21 Final Drive and Switch pitch transmission.
Also $745 for the cheaper ones Jerry sells was too rich for my budget.
Regards,
Rob M.
USAussie
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Paul Leavitt
Sent: Friday, October 15, 2010 5:52 AM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Q. for Rob M.
Rob, what rockers are you going to use. Stock or potters ajustable??? One of
the Potter rockers made by Probe failed on me and bent an exhaust
valve.,,,PL
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
