| [GMCnet] Fwd: Wheel Spacers [message #100465] |
Mon, 20 September 2010 19:45  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
This one's the correct one; no telling who the other one is -- maybe the
same.
http://www.highlandmachinetool.com/
<http://www.highlandmachinetool.com/>
Ken H.
---------- Forwarded message ----------
From: Ken Henderson <hend4800@bellsouth.net>
Date: Mon, Sep 20, 2010 at 8:43 PM
Subject: Re: Wheel Spacers
To: David L Greenberg <davegreenberg1@juno.com>
Bobby Moore was the primary contact with Highland Machine shop. IIRC, the
current owner is JIm Bezy, son of the deceased GMCer who owned it, Ed? Bezy.
Here's a link to the company, I think:
http://www.macraesbluebook.com/search/company.cfm?company=410198
Could be completely wrong company.
<http://www.macraesbluebook.com/search/company.cfm?company=410198>
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI+ & EBL
www.gmcwipersetc.com
On Mon, Sep 20, 2010 at 5:26 PM, David L Greenberg
<davegreenberg1@juno.com>wrote:
> Hi JG,
>
> It seems to me there is a machine shop in TN, AL or thereabouts that made
> spacers which sold for le$$ than the ones I bought
>
> I'll ask Ken Henderson to write you directly as he knows everything that
> goes on below the Mason-Dixon Line. VBG
>
> Ken is it Highland Machine or Tool and do they still make spacers?
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
