GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » [GMCnet] Fw: Endless Possibilties
[GMCnet] Fw: Endless Possibilties [message #98424] Fri, 03 September 2010 20:26 Go to next message
jade is currently offline  jade   United States
Messages: 163
Registered: August 2009
Karma: 0
Senior Member

----- Original Message -----
From: Jim Decheine
To: Jim Decheine
Sent: Friday, September 03, 2010 6:20 PM
Subject: Endless


MAN CAN WE USE SOMETHING LIKE THIS FOR PARTS FOR OUR GMC'S

This is amazing. The duplicate wrench is an amazing practical demonstration...when it came out as a working tool. Click on link below:

3D technology

JADE
73 23' ?73 26' Painted Desert
Ajo,AZ.
KC7QGC


_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Fw: Endless Possibilties [message #98426 is a reply to message #98424] Fri, 03 September 2010 20:39 Go to previous messageGo to next message
C Boyd is currently offline  C Boyd   United States
Messages: 2629
Registered: April 2006
Karma: 18
Senior Member
jade wrote on Fri, 03 September 2010 21:26


----- Original Message -----
From: Jim Decheine
To: Jim Decheine
Sent: Friday, September 03, 2010 6:20 PM
Subject: Endless


MAN CAN WE USE SOMETHING LIKE THIS FOR PARTS FOR OUR GMC'S

This is amazing. The duplicate wrench is an amazing practical demonstration...when it came out as a working tool. Click on link below:

3D technology

JADE
73 23' ?73 26' Painted Desert
Ajo,AZ.
KC7QGC


_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist










link ????

C. Boyd
76 Crestmont
East Tennessee

Report message to a moderator

Re: [GMCnet] Fw: Endless Possibilties [message #98449 is a reply to message #98424] Fri, 03 September 2010 22:46 Go to previous messageGo to next message
gmcrv1 is currently offline  gmcrv1   United States
Messages: 839
Registered: August 2007
Location: Memphis
Karma: -1
Senior Member
Link? What link?

Tom Eckert N2VWN - In search of the missing link...
73 Glacier
Oakland, TN

On Fri, Sep 3, 2010 at 8:26 PM, Jim Decheine <jade@tabletoptelephone.com>wrote:

>
> ----- Original Message -----
> From: Jim Decheine
> To: Jim Decheine
> Sent: Friday, September 03, 2010 6:20 PM
> Subject: Endless
>
>
> MAN CAN WE USE SOMETHING LIKE THIS FOR PARTS FOR OUR GMC'S
>
> This is amazing. The duplicate wrench is an amazing practical
> demonstration...when it came out as a working tool. Click on link below:
>
> 3D technology
>
> JADE
> 73 23' ?73 26' Painted Desert
> Ajo,AZ.
> KC7QGC
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Fw: Endless Possibilties [message #98473 is a reply to message #98424] Sat, 04 September 2010 07:47 Go to previous messageGo to next message
fred v is currently offline  fred v   United States
Messages: 999
Registered: April 2006
Location: pensacola, fl.
Karma: 0
Senior Member
here is what he was talking about:
http://www.jaylenosgarage.com/video/nextengines-3d-scanner/944641/

Fred V
'77 Royale RB 455
P'cola, Fl

Report message to a moderator

Re: [GMCnet] Fw: Endless Possibilties [message #98475 is a reply to message #98473] Sat, 04 September 2010 08:11 Go to previous messageGo to next message
mike miller   United States
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
Senior Member
fred v wrote on Sat, 04 September 2010 05:47

here is what he was talking about:
http://www.jaylenosgarage.com/video/nextengines-3d-scanner/944641/




Closer to my reach...
<http://reprap.org/wiki/Main_Page>

Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com

Report message to a moderator

Re: [GMCnet] Fw: Endless Possibilties [message #98476 is a reply to message #98424] Sat, 04 September 2010 08:12 Go to previous messageGo to next message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada
Karma: 3
Senior Member
Neat technology...
Who's the volunteer to buy a setup!

Chris.. you could use one at work and you need the tax write-off Laughing

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

Re: [GMCnet] Fw: Endless Possibilties [message #98479 is a reply to message #98424] Sat, 04 September 2010 08:20 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
If you have Jay Leno kind of capital and need parts for a broken steam car toys like that great, but the cost to purchase or even buy time on one is not trivial and unless a part is very complex it can usually be machined from billet for less cost and time.

A now defunct company I once worked for tried real hard to make money doing that with two big scanners and several different "printers" (a laser sinter for metal, a laser fuser for nylon, paper cutters for making patterns for sand castings and a plastic [SLA]to make parts that looking production). Did I mention that the are out of business??

Time on those machines is available in Michigan if you shop for it and can roll in as filler job (no time table), and probably will be until the economy picks up (maybe some time after 2012) or until the companies with the hardware move it all to China (fact - not a joke or partisan based opinion).

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: [GMCnet] Fw: Endless Possibilties [message #98481 is a reply to message #98475] Sat, 04 September 2010 08:24 Go to previous messageGo to next message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada
Karma: 3
Senior Member
Hey, now there's a great machine!!

but I need to clone myself so I can send the clone to work and I can play on the GMC! Cool

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

Re: [GMCnet] Fw: Endless Possibilties [message #98594 is a reply to message #98479] Sat, 04 September 2010 23:44 Go to previous message
kelvin is currently offline  kelvin   United States
Messages: 608
Registered: February 2004
Location: Eugene, OR
Karma: 0
Senior Member
> Time on those machines is available in Michigan if you shop for it
> and can roll in as filler job (no time table), and probably will be
> until the economy picks up (maybe some time after 2012) or until the
> companies with the hardware move it all to China (fact - not a joke
> or partisan based opinion).
> Matt

Fact, indeed.

We're the ones who are in love with prices at Walmart and Harbor
Freight. Those prices don't come from workers making $15-20/hr...

Just sayin'...

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic: Re: [GMCnet] 2500 HD rims?
Next Topic: Just got back from maiden voyage 12.37 mpg!
Goto Forum:
  


Current Time: Thu Sep 26 18:22:03 CDT 2024

Total time taken to generate the page: 0.02337 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software