Alcoa Lug nuts [message #98261] |
Thu, 02 September 2010 16:56 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Can anyone post or send a photo that shows the proper lugnut for the Alcoa's? I'm not sure that the Mag Lugs with the shank will work for these, and the ones JimK has are tapered with a not so shiny washer. I assumed the face was supposed to be flat, like the OEM lugnuts.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
Re: [GMCnet] Alcoa Lug nuts [message #98263 is a reply to message #98261] |
Thu, 02 September 2010 17:00 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
They look like this http://appliedgmc.com/prod.itml/icOid/945
and you can put a cover on them, Alcoa or otherwise..
Dennis Sexton
73 PD 230
Germantown, TN
USA
-----Original Message-----
From: Chris Choffat <cchoffataz@yahoo.com>
To: gmclist@temp.gmcnet.org
Sent: Thu, Sep 2, 2010 4:56 pm
Subject: [GMCnet] Alcoa Lug nuts
Can anyone post or send a photo that shows the proper lugnut for the Alcoa's?
'm not sure that the Mag Lugs with the shank will work for these, and the ones
imK has are tapered with a not so shiny washer. I assumed the face was supposed
o be flat, like the OEM lugnuts.
-
Chr$: Perpetual SmartAss
7 Ex-Kingsley 455, Power Drive, 3:21 FD, Quadra bag. The Engineer's Motorhome
cottsdale, AZ
Photosite: Chrisc "It has Begun"
______________________________________________
MCnet mailing list
ist Information and Subscription Options:
ttp://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
Re: Alcoa Lug nuts [message #98264 is a reply to message #98261] |
Thu, 02 September 2010 17:11 |
Bob de Kruyff
Messages: 4260 Registered: January 2004 Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
The Alcoa's have an integrated washer as shown. You can't interchange those with OEM or the Eagles.
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|
|
Re: Alcoa Lug nuts [message #98294 is a reply to message #98261] |
Thu, 02 September 2010 21:01 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
I don't mind paying for a lugnut. I wish the Alcoa's were like the Eagle's I have. Nice chrome plated, no covers to lose.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
Re: Alcoa Lug nuts [message #98323 is a reply to message #98261] |
Fri, 03 September 2010 06:58 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
Chris,
I have Eagle 034's that the PO installed in about 2005. The chrome cracks when a wrench is applied, likely a few air guns too, so mine were rusty when I got the coach. Same for the chrome axle cap.
I would rather have the replaceable plastic caps.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
[Updated on: Fri, 03 September 2010 06:59] Report message to a moderator
|
|
|
Re: Alcoa Lug nuts [message #98345 is a reply to message #98294] |
Fri, 03 September 2010 10:20 |
Bob de Kruyff
Messages: 4260 Registered: January 2004 Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
Chr$ wrote on Thu, 02 September 2010 20:01 | I don't mind paying for a lugnut. I wish the Alcoa's were like the Eagle's I have. Nice chrome plated, no covers to lose.
|
You may not have to worry about it here in AZ Chris, but I've seen those chrome lug nuts rust before your eyes.
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|
Re: Alcoa Lug nuts [message #98352 is a reply to message #98345] |
Fri, 03 September 2010 11:37 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Yeah I have had them before, and have them on my truck, but they are fine here.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|