| Re: [GMCnet] Macerator grease impeller [message #96848] |
Sun, 22 August 2010 17:47 |
kenneth hugelier
Messages: 89
Registered: August 2008
Karma: 0
|
Member |
|
|
This must be macerator repair week. I had my Jabsco out the other day because it was blowing fuses. It was a fairly easy job as the PO mounted it in a three inch rubber "Y". Hair and stuff was under the impeller which appeared to be forcing it against the SS plate. I thought I had a bearing going bad but every thing now turns easy. I also found the ground wire was corroded at it's frame mount so this may have had something to do with the problem as well. I did the job before I saw these posts so I didn't lube the impeller before assembly. I may try the olive oil trick.
The poop pump is now back in operation and I feel much better - ahhh.
ken hugelier 77 PB Det. Mich.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
