| Shower [message #95080] |
Sun, 08 August 2010 20:46  |
 |
ljdavick
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
Does anyone have pictures or drawings of what is behind the hole in the bath assembly where the shower head pokes through? One of my PO's removed the shower head and I'd like to reinstall it.
I have the new faucet from Jim K with the diverter, then again the original faucet has the diverter still, but it must be disabled, or stuck.
I bought an oxygenetics shower head from Camping World when they were on sale, so now I think I need to play around with Pex, or something.
Has anyone gone here before?
Thanks.
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
|
|
|
| Re: [GMCnet] Shower [message #95085 is a reply to message #95080] |
Sun, 08 August 2010 20:58  |
Bill Massey
Messages: 201
Registered: March 2009
Karma: 0
|
Senior Member |
|
|
I was into mine just the other day, Larry. It's just a coupling and nipple
with enough fiber washers so that the shower coupling will tighten up to the
fiber glass on it. My PO must have had a problem because he'd put a check
valve in place of the coupling, (or maybe that is the way is was supposed to
be), anyhow, the check valve was cracked allowing water to flood my medicine
cabinet. I replaced that with a normal pipe coupling and all is well.
bdub
-----Original Message-----
From: On Behalf Of Larry Davick
Does anyone have pictures or drawings of what is behind the hole in the bath
assembly where the shower head pokes through? One of my PO's removed the
shower head and I'd like to reinstall it.
I have the new faucet from Jim K with the diverter, then again the original
faucet has the diverter still, but it must be disabled, or stuck.
I bought an oxygenetics shower head from Camping World when they were on
sale, so now I think I need to play around with Pex, or something.
Has anyone gone here before?
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Shower [message #95087 is a reply to message #95085] |
Sun, 08 August 2010 21:15 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
I'll bet the check valve was a code requirement. You know, so when you
leave the shower head in the toilet it won't siphon back into the fresh
water system.
Ken H.
On Sun, Aug 8, 2010 at 9:58 PM, Billy Massey <bdub@pgrb.com> wrote:
> I was into mine just the other day, Larry. It's just a coupling and nipple
> with enough fiber washers so that the shower coupling will tighten up to
> the
> fiber glass on it. My PO must have had a problem because he'd put a check
> valve in place of the coupling, (or maybe that is the way is was supposed
> to
> be), anyhow, the check valve was cracked allowing water to flood my
> medicine
> cabinet. I replaced that with a normal pipe coupling and all is well.
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
|
| Re: [GMCnet] Shower [message #95093 is a reply to message #95089] |
Mon, 09 August 2010 00:51 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I think mine is just a flexible piece of hose back behind the wall. Something like a sprayer on a kitchen sink would use.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] Shower [message #95101 is a reply to message #95080] |
Mon, 09 August 2010 09:00 |
dngmissett
Messages: 84
Registered: February 2004
Karma: 0
|
Member |
|
|
Larry
You might consider doing something like this
http://www.gmcmhphotos.com/photos/showgallery.php?cat=3811
JWID
Dick Missett
Wyoming, PA
--- On Sun, 8/8/10, Larry Davick <ljdavick@comcast.net> wrote:
From: Larry Davick <ljdavick@comcast.net>
Subject: [GMCnet] Shower
To: gmclist@temp.gmcnet.org
Date: Sunday, August 8, 2010, 9:46 PM
Does anyone have pictures or drawings of what is behind the hole in the bath assembly where the shower head pokes through? One of my PO's removed the shower head and I'd like to reinstall it.
I have the new faucet from Jim K with the diverter, then again the original faucet has the diverter still, but it must be disabled, or stuck.
I bought an oxygenetics shower head from Camping World when they were on sale, so now I think I need to play around with Pex, or something.
Has anyone gone here before?
Thanks.
--
Larry Davick
The Mystery Machine
1976 Palm Beach
Fremont, Ca
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
