GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] GMC Roof Patch
[GMCnet] GMC Roof Patch [message #95054] Sun, 08 August 2010 15:22 Go to next message
rallymaster is currently offline  rallymaster   United States
Messages: 662
Registered: February 2004
Location: North Plains, ORYGUN
Karma: -4
Senior Member
Hi, Guys.
What are my options for patching the holes left after removing the
Winegard TV antenna from my roof?
I haven't done it, yet, so I don't know how big the holes are. Should I
patch the holes individually, (and with what) or use a plate to cover the
whole area?
Oh, yeah, how do I get that sticky white sealant goo that Camping World
(?) sealed the edges with?

Thanks,

RonC


Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ron & Linda Clark
North Plains, ORYGUN
78 Eleganza II
Re: [GMCnet] GMC Roof Patch [message #95062 is a reply to message #95054] Sun, 08 August 2010 17:00 Go to previous messageGo to next message
zhagrieb is currently offline  zhagrieb   United States
Messages: 676
Registered: August 2009
Location: Portland Oregon
Karma: 0
Senior Member
If you really, really, really, want to make it all disappear then make a single hole and cut an aluminum patch that fits as exactly as possible into the hole. Make a second patch about an inch larger overall. Flush rivet the larger to the inside of the roof with suitable sealant between, then fit the smaller into the hole and flush rivet it to the first.

Plan 2, flush rivet a single patch to the inside of the roof covering all holes and fill the holes with bondo.

Plan 3, put rubber washers over suitable sized screws, coat with sealant and use them to fill the small holes, make an aluminum patch to cover the large hole(s), coat with sealant and screw in place with sheet metal screws or pop rivet.

Glenn Giere


Glenn Giere, Portland OR, K7GAG '73 "Moby the Motorhome" 26'
Re: [GMCnet] GMC Roof Patch [message #95068 is a reply to message #95054] Sun, 08 August 2010 19:20 Go to previous messageGo to next message
Richard MacDonald is currently offline  Richard MacDonald   United States
Messages: 47
Registered: July 2010
Karma: 0
Member
This is how I patched my Roof Vents. It is a lot bigger than what you
need but the same principle.
http://www.gmcmhphotos.com/photos/showgallery.php?cat=5524



On 8/8/2010 4:22 PM, rallymaster@juno.com wrote:
> Hi, Guys.
> What are my options for patching the holes left after removing the
> Winegard TV antenna from my roof?
> I haven't done it, yet, so I don't know how big the holes are. Should I
> patch the holes individually, (and with what) or use a plate to cover the
> whole area?
> Oh, yeah, how do I get that sticky white sealant goo that Camping World
> (?) sealed the edges with?
>
> Thanks,
>
> RonC
>
>
> Ron& Linda Clark
> 1978 Eleganza II
> North Plains, ORYGUN
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] GMC Roof Patch [message #95074 is a reply to message #95068] Sun, 08 August 2010 20:04 Go to previous messageGo to next message
Gary Cottingame is currently offline  Gary Cottingame   United States
Messages: 85
Registered: January 2005
Karma: 0
Member
Has anyone ever tried to Tig or Mig welded a roof patch successfully??

Gary
26 73 CL
TZE21
Denison, Tx


--- On Sun, 8/8/10, Richard MacDonald <76edgemonte@gmail.com> wrote:

> From: Richard MacDonald <76edgemonte@gmail.com>
> Subject: Re: [GMCnet] GMC Roof Patch
> To: gmclist@temp.gmcnet.org
> Date: Sunday, August 8, 2010, 9:16 PM
>   This is how I patched my Roof
> Vents.  It is a lot bigger than what you
> need but the same principle.
> http://www.gmcmhphotos.com/photos/showgallery.php?cat=5524
>
>
>
> On 8/8/2010 4:22 PM, rallymaster@juno.com
> wrote:
> > Hi, Guys.
> > What are my options for patching the holes left after
> removing the
> > Winegard TV antenna from my roof?
> > I haven't done it, yet, so I don't know how big the
> holes are.  Should I
> > patch the holes individually, (and with what) or use a
> plate to cover the
> > whole area?
> > Oh, yeah, how do I get that sticky white sealant goo
> that Camping World
> > (?) sealed the edges with?
> >
> > Thanks,
> >
> > RonC
> >
> >
> > Ron&  Linda Clark
> > 1978 Eleganza II
> > North Plains, ORYGUN
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] GMC Roof Patch [message #95076 is a reply to message #95074] Sun, 08 August 2010 20:12 Go to previous messageGo to next message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
Senior Member
Don't try it!!! Not without LOTS of spark/fire precautions. One spark into
the exposed foam insulation can start a fire you probably can't stop.

Ken H.

On Sun, Aug 8, 2010 at 9:04 PM, Gary Cottingame <gcottingame@yahoo.com>wrote:

> Has anyone ever tried to Tig or Mig welded a roof patch successfully??
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
Re: [GMCnet] GMC Roof Patch [message #95130 is a reply to message #95054] Mon, 09 August 2010 15:27 Go to previous messageGo to next message
rallymaster is currently offline  rallymaster   United States
Messages: 662
Registered: February 2004
Location: North Plains, ORYGUN
Karma: -4
Senior Member
Thanks to all who had the suggestions on roof patch solutions. Now all I
have to do is find out what size holes I have to deal with, and find that
darned round tuit.

RonC

On Mon, 9 Aug 2010 12:01:27 -0700 rallymaster@juno.com writes:

Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ron & Linda Clark
North Plains, ORYGUN
78 Eleganza II
Re: [GMCnet] GMC Roof Patch [message #95194 is a reply to message #95054] Tue, 10 August 2010 00:39 Go to previous message
gmchunter is currently offline  gmchunter   United States
Messages: 222
Registered: March 2008
Location: ORANGE, CA
Karma: 0
Senior Member
"What are my options for patching the holes left after removing the Winegard TV antenna from my roof?"


How about replacing the antenna with a winegard satellite dish?

Has anyone done this? Is it a direct replacement?

Michael


Previous Topic: macerator repair
Next Topic: Couple of electrical questions
Goto Forum:
  


Current Time: Sun Sep 22 04:36:31 CDT 2024

Total time taken to generate the page: 0.01570 seconds