[GMCnet] 3" exhaust pipe [message #94291] |
Mon, 02 August 2010 08:25 |
pete lyons
Messages: 81 Registered: June 2010
Karma: 0
|
Member |
|
|
Buying the pipe for the coach today, and need some info from those who have
done this before.
I know it's a tight fit, but does it matter if the pipe is flared so it can
be joined together?
thank you,
pete
--
Pete Lyons
New Albany, IN
76 Eleganza II "Optimus Prime"
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] 3" exhaust pipe [message #94294 is a reply to message #94291] |
Mon, 02 August 2010 08:43 |
Dennis S
Messages: 3046 Registered: November 2005
Karma: 2
|
Senior Member |
|
|
If you flare it you will not get it through the silicone grommets. The flare should be on the end of the Y pipe and the front end of the tail pipe (pipe that exits the rear) not on the straight length.
Dennis Sexton
73 PD 230
Germantown, TN
USA
-----Original Message-----
From: pete lyons <meandmygmcmh@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Mon, Aug 2, 2010 8:25 am
Subject: [GMCnet] 3" exhaust pipe
Buying the pipe for the coach today, and need some info from those who have
one this before.
I know it's a tight fit, but does it matter if the pipe is flared so it can
e joined together?
thank you,
ete
-
ete Lyons
ew Albany, IN
6 Eleganza II "Optimus Prime"
______________________________________________
MCnet mailing list
ist Information and Subscription Options:
ttp://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
Re: [GMCnet] 3" exhaust pipe [message #94307 is a reply to message #94294] |
Mon, 02 August 2010 10:25 |
tphipps
Messages: 3005 Registered: August 2004 Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
Use the wide band type of exhaust clamps to join the pipe. Makes it very easy.
Tom Phipps,
75 GMC, with new OEM style exhaust from Leigh Harrison.
2012 Phoenix Cruiser model 2552
KA4CSG
|
|
|
|
|
Re: [GMCnet] 3" exhaust pipe [message #94387 is a reply to message #94346] |
Mon, 02 August 2010 21:51 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Ken,
Your right, we give free advise to anyone that calls us on our toll free
line.
We find that we like to be ddoubly sure that the joints will remain , so we
expand the ends then use the band clamp over each side o assure of a even
better seal.
On Mon, Aug 2, 2010 at 2:07 PM, Ken Coit <ktcoit@gmail.com> wrote:
> The kit I got from Jim K came with flares and bands. It is solid. The
> flares
> won't fit through the grommets, but that is not an issue if you build it
> right. I'm sure Jim would be happy to help you out.
>
> --
> Ken Coit, ND7N
> Raleigh, NC
> Parfait Royale
> 1978 Royale Rear Bath, 403, 3.07
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|