| Aluminum Intake [message #93475] |
Tue, 27 July 2010 12:43  |
 |
WD0AFQ
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
|
Senior Member |
|
|
Anyone thinking about the new Rockwell intake, here is your chance to grab one with no shipping. With our bad luck' back in the winter' I ended up with two. I will have the spare at Jim's table in Du Quoin. It belongs to him anyway. If you can't be there but have a friend there, give him the money and he can deliver it to you. Also, to avoid shipping on large items, give Jim K. a call so he can bring it to you at Du Quoin, deposit required. The 3 inch exhaust, with headers, always sells the first day and is just left for display. So, get to thinking as to what you may need so it can come with someone to save on shipping.
Dan
3 In Stainless Exhaust Headers
One Ton All Discs/Reaction Arm
355 FD/Quad Bag/Alum Radiator Manny Tran/New eng.
Holley EFI/10 Tire Air Monitoring System
Solarized Coach/Upgraded Windows
Satelite TV/On Demand Hot Water/3Way Refer
|
|
|
|
| Re: [GMCnet] Aluminum Intake [message #93534 is a reply to message #93475] |
Tue, 27 July 2010 17:34  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I thought one of our guys barrowed the intake.
On Tue, Jul 27, 2010 at 10:43 AM, Dan Gregg <gregg_dan@hotmail.com> wrote:
>
>
> Anyone thinking about the new Rockwell intake, here is your chance to grab
> one with no shipping. With our bad luck' back in the winter' I ended up with
> two. I will have the spare at Jim's table in Du Quoin. It belongs to him
> anyway. If you can't be there but have a friend there, give him the money
> and he can deliver it to you. Also, to avoid shipping on large items, give
> Jim K. a call so he can bring it to you at Du Quoin, deposit required. The 3
> inch exhaust, with headers, always sells the first day and is just left for
> display. So, get to thinking as to what you may need so it can come with
> someone to save on shipping.
> Dan
> --
> Dan & Teri Gregg
>
> http://danandteri.blogspot.com/
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Aluminum Intake [message #93591 is a reply to message #93475] |
Wed, 28 July 2010 03:18 |
aaaa
Messages: 13
Registered: April 2010
Karma: 0
|
Junior Member |
|
|
What about one for the 403? Or do you just get the 2711 Edlebrock manifold? I'm planning on some frankenstein mods for the 403 like electronic distributor from the Caddy olds and an ecm out of a 9o GM 3/4 ton with tbi. Scout trip to the mens mall tomorrow.
Ken Morris
Modesto California
1978 Birchaven
|
|
|
|
| Re: Aluminum Intake [message #93630 is a reply to message #93591] |
Wed, 28 July 2010 10:31 |
Bob de Kruyff
Messages: 4260
Registered: January 2004
Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
""What about one for the 403? Or do you just get the 2711 Edlebrock manifold? I'm planning on some frankenstein mods for the 403 like electronic distributor from the Caddy olds and an ecm out of a 9o GM 3/4 ton with tbi. Scout trip to the mens mall tomorrow. ""
There are lots of options for the 403 since it was not a special "low" Toronado manifold. Many of the 307 manifolds are suitable and many of those were available in aluminum as well. I would go here to research more:
http://www.442.com/oldsfaq/ofinm.htm#Intake Manifolds
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
