GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Side trim, early model (Need trim material recomdations)
Side trim, early model [message #92105] Thu, 15 July 2010 22:18 Go to next message
Jim Rountree is currently offline  Jim Rountree   United States
Messages: 47
Registered: July 2010
Location: San Antonio, TX
Karma: 0
Member
I have a 1976 PB and the PO removed the original plastic trim and replaced with a wide chrome trim. The chrome is now all gone and i would like to return to a stock looking configuration. Any suggestion on where to get the material

Jim Rountree San Antonio,TX 76 PB, 76 Royale RB
Re: Side trim, early model [message #92113 is a reply to message #92105] Thu, 15 July 2010 22:53 Go to previous messageGo to next message
JohnL455 is currently offline  JohnL455   United States
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma: 12
Senior Member
If you are talking about the outside body belt molding that goes from side marker light front to back, I know Cinnabar has it as do I believe the Jims and Gateway lists it and probably Grandview as well.

John Lebetski
Woodstock, IL
77 Eleganza II
Re: [GMCnet] Side trim, early model [message #92118 is a reply to message #92105] Thu, 15 July 2010 23:20 Go to previous messageGo to next message
Arthur Mansfield is currently offline  Arthur Mansfield   United States
Messages: 290
Registered: April 2010
Karma: 0
Senior Member
I looked at http://www.jcwhitney.com/deluxe-vinyl-body-side-molding/p2002663.jcwx and they have some trim that is 1 1/8 across. I was told that JC has the proper trim and this is what I found.


On Jul 15, 2010, at 9:18 PM, Jim Rountree wrote:

>
>
> I have a 1976 PB and the PO removed the original plastic trim and replaced with a wide chrome trim. The chrome is now all gone and i would like to return to a stock looking configuration. Any suggestion on where to get the material
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Side trim, early model [message #92142 is a reply to message #92113] Fri, 16 July 2010 07:01 Go to previous messageGo to next message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
Senior Member
Or if you're planning to have Topeka Graphics paint the coach, they can
supply it.

Ken H.


On Thu, Jul 15, 2010 at 11:53 PM, John R. Lebetski <gransport@aol.com>wrote:

>
>
> If you are talking about the outside body belt molding that goes from side
> marker light front to back, I know Cinnabar has it as do I believe the Jims
> and Gateway lists it and probably Grandview as well.
> --
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
Re: Side trim, early model [message #92183 is a reply to message #92105] Fri, 16 July 2010 11:40 Go to previous message
gmchunter is currently offline  gmchunter   United States
Messages: 222
Registered: March 2008
Location: ORANGE, CA
Karma: 0
Senior Member
Here's another site that carries 2" trim.


http://www.customautotrim.com/products/moldings/body.htm

Michael
Previous Topic: Plywood Subfloor Fasteners
Next Topic: [GMCnet] (no subject)
Goto Forum:
  


Current Time: Tue Oct 01 02:26:19 CDT 2024

Total time taken to generate the page: 0.03726 seconds