Suspension out - what to do while it's out [message #91748] |
Mon, 12 July 2010 23:58 |
midlf
Messages: 2212 Registered: July 2007 Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
OK - I've got the front suspension out of Smurffie for new bushings, hubs and knuckles for new bearings and Zerks, and the axles are out for new boots and grease. The wheel wells are also out.
I'm looking at that great open space and thinking now is the time to do a bunch of things that will be much easier now than they will after I get the suspension back in.
As I have to replace the exhaust I'll also get the manifolds off and checked out. The brake lines are getting replaced. I want to do some work on the air compressor and lines. Replace the heater hoses. Replace the battery wiring to the starter. I'm nowhere near being able to do the AC compressor.
Are there any thoughts as to what other jobs would be so much easier with the suspension out? You know that job you did where you wished the suspension was not in the way.
Other things on my list that I don't know if they would be easier w/o the susp are to:
-pull the radiator and get it checked or rebuilt/replaced
-replace the rad hoses
-replace all vac lines
-install the vac pump and reservoir
-replace the MC and booster.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
|
|
|