| Hooray - some progress [message #91747] |
Mon, 12 July 2010 23:45  |
midlf
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
I finally got one on those, "can't seem to get it done" jobs done today. Got both gas tanks treated with POR-15 tank liner. Also all the filler lines. Finally. So many things kept interfering, severe rust in one tank. Cold weather, just all the other stuff going on. Got the tank from the transmode back from the rust stripper. They did a great job, looked like new and it had been severely rusted. Fortunately no pinholes or loose baffles. I'm thinking I'll get the other tank out of the transmode and the rusted one from Smurffie and run them down there.
They also did the lower a-arms, the torsion bar cross-member and a steel wheel I will use for the spare.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
|
| Re: Hooray - some progress [message #91834 is a reply to message #91747] |
Tue, 13 July 2010 17:01  |
Larry C
Messages: 1168
Registered: July 2004
Location: NE Illinois by the Illino...
Karma: 0
|
Senior Member |
|
|
Got both gas tanks treated with POR-15 tank liner.
_________________________________________________________
Hey your moving ahead a step or two.
Let me know how the Por15 treatment goes.
I may have a use for such a product in the near future
LarC ( I'll Git-er Done when I find another "ToIt" )
Gatsbys' CRUISER  08-18-04
74 GLACIER X, 260/455-APC-4 Bagg'r
Remflex Manifold gaskets
CampGrounds needed, Add yours to "PLACES" />
http://www.gmceast.com/travel
_
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
