|
Re: [GMCnet] Inner roof panel repair [message #87695 is a reply to message #87660] |
Mon, 07 June 2010 17:49 |
AStasunas
Messages: 58 Registered: April 2009 Location: Winter Springs, Fl
Karma: 0
|
Member |
|
|
The plastic is ABS. I repaired some cracks and holes in mine using West System epoxy. For cracks and small hole I used aluminum duct tape as backer for the epoxy. For the larger holes I also used fiberglass mat as reinforcement. To simulate the pebble finish I used A SEM product for that purpose and after painted the panels with SEM.
Regards,
Tony
"Vinnie"
1975 Eleganza,
Winter Springs, Fl
|
|
|