|
|
Re: [GMCnet] Instrument panels [message #85856 is a reply to message #85846] |
Mon, 24 May 2010 16:03 |
GeorgeRud
Messages: 1380 Registered: February 2007 Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
If you're looking for a used original one, Mike Bozart @ GEMRECS can probably help you. New, custom ones are usually the Mac Dash ones. Either of the Jims can help you on those I believe, or his website is www.custominstrumentpanels.com.
George Rudawsky
Chicago, IL
75 Palm Beach
|
|
|
Re: [GMCnet] Instrument panels [message #85881 is a reply to message #85856] |
Mon, 24 May 2010 18:01 |
|
You can buy through the Jims or directly from Mac McNeal the guy behind the
company. Personally, I'd deal directly with him. He'll give you lots of
options.
Byron
George Rudawsky wrote:
>
>
> If you're looking for a used original one, Mike Bozart @ GEMRECS can probably
> help you. New, custom ones are usually the Mac Dash ones. Either of the Jims
> can help you on those I believe, or his website is
> www.custominstrumentpanels.com.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Byron Songer
Full-timing to enjoy the USA
Former owner but still an admirer
GMC paint schemes at -
http://www.songerconsulting.net
|
|
|
Re: [GMCnet] Instrument panels [message #85934 is a reply to message #85881] |
Mon, 24 May 2010 20:22 |
Dr. Detroit
Messages: 158 Registered: April 2010 Location: Novi, MI.
Karma: 0
|
Senior Member |
|
|
I was down at the GMC Co-op and I saw that Jim B. has a Mold to make new ones out of FRP.
1973 GMC 23'
All Birch and Maple Interior Cabinetry. TZE033V100221
"The Honeycomb Hideout"
|
|
|
Re: [GMCnet] Instrument panels [message #85963 is a reply to message #85934] |
Mon, 24 May 2010 22:17 |
Larry C
Messages: 1168 Registered: July 2004 Location: NE Illinois by the Illino...
Karma: 0
|
Senior Member |
|
|
I was down at the GMC Co-op and I saw that Jim B. has a Mold to make new ones out of FRP.
_____________________________________________________
I was just thinking that JimB at the Coop Resort had been designing a dash a year or so ago and he might be ready to produce some.
At the time I was there, I had strongly considered a new dash, part of the reason was because my AC was NIL...
I have since installed the underdash AC and did some work on my OEM dash so I'll probably stay with the OEM now.
Check with JimB and see where he is with that dash he was working on.
LarC ( Removing the OEM and building a new dash, gages, wiring, air ducts, etc, makes me a tad bit nervous )
Gatsbys' CRUISER 08-18-04
74 GLACIER X, 260/455-APC-4 Bagg'r
Remflex Manifold gaskets
CampGrounds needed, Add yours to "PLACES" />
http://www.gmceast.com/travel
_
|
|
|