| [GMCnet] Gas Tank repair - from the top [message #84515] |
Fri, 14 May 2010 08:35  |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
A hot topic here, is Gas Tank repair. ( normally done twice - wrong the
first time)
Now most of this is about:
sender leaks
sender repair
hose replacement / leaks
bad sender grounds and wires
etc
all of this can be done from the top, for less work and less dangerous. So
now we need to know where to cut 2 holes in the floor , and insert port
holes, so we can come back and visit the problems again, and again, and
again.
I am looking for someone who has a 23 with the tanks down so I can get the
measurements on how to locate the place to cut a hole in the floor (with the
GMCtool ;>)
Here is what I have from ScottA, but it is all for the 26.
http://www.gmcmhphotos.com/photos/showgallery.php?cat=4634
So what-say anyone, is your 23 open, or does anyone know of these
measurements for a 23 ?
gene
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Gas Tank repair - from the top [message #84526 is a reply to message #84515] |
Fri, 14 May 2010 09:51  |
John Boyer
Messages: 37
Registered: January 2010
Karma: 0
|
Member |
|
|
Gene, I can get back to you later tonight when I get to the MH. My holes are
already cut and covered with metal patch plates (gotta get those senders
in). Let me measure them. What model do you have so I've got some reference.
John
John and Linda Boyer
'73 Glacier 23'
----- Original Message -----
From: "Mr.erf ERFisher" <mr.erfisher@gmail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Friday, May 14, 2010 8:35 AM
Subject: [GMCnet] Gas Tank repair - from the top
A hot topic here, is Gas Tank repair. ( normally done twice - wrong the
first time)
Now most of this is about:
sender leaks
sender repair
hose replacement / leaks
bad sender grounds and wires
etc
all of this can be done from the top, for less work and less dangerous. So
now we need to know where to cut 2 holes in the floor , and insert port
holes, so we can come back and visit the problems again, and again, and
again.
I am looking for someone who has a 23 with the tanks down so I can get the
measurements on how to locate the place to cut a hole in the floor (with the
GMCtool ;>)
Here is what I have from ScottA, but it is all for the 26.
http://www.gmcmhphotos.com/photos/showgallery.php?cat=4634
So what-say anyone, is your 23 open, or does anyone know of these
measurements for a 23 ?
gene
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Gas Tank repair - from the top [message #84537 is a reply to message #84526] |
Fri, 14 May 2010 10:34 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
geeeessssee
I hope they (23) are all the same
gene
On Fri, May 14, 2010 at 7:51 AM, John Boyer <jboyer@mchsi.com> wrote:
> Gene, I can get back to you later tonight when I get to the MH. My holes
> are
> already cut and covered with metal patch plates (gotta get those senders
> in). Let me measure them. What model do you have so I've got some
> reference.
> John
>
> John and Linda Boyer
> '73 Glacier 23'
> ----- Original Message -----
> From: "Mr.erf ERFisher" <mr.erfisher@gmail.com>
> To: <gmclist@temp.gmcnet.org>
> Sent: Friday, May 14, 2010 8:35 AM
> Subject: [GMCnet] Gas Tank repair - from the top
>
>
> A hot topic here, is Gas Tank repair. ( normally done twice - wrong the
> first time)
>
> Now most of this is about:
> sender leaks
> sender repair
> hose replacement / leaks
> bad sender grounds and wires
> etc
>
> all of this can be done from the top, for less work and less dangerous.
> So
> now we need to know where to cut 2 holes in the floor , and insert port
> holes, so we can come back and visit the problems again, and again, and
> again.
>
> I am looking for someone who has a 23 with the tanks down so I can get the
> measurements on how to locate the place to cut a hole in the floor (with
> the
> GMCtool ;>)
>
> Here is what I have from ScottA, but it is all for the 26.
> http://www.gmcmhphotos.com/photos/showgallery.php?cat=4634
>
> So what-say anyone, is your 23 open, or does anyone know of these
> measurements for a 23 ?
> gene
>
>
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
