|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) [message #84240 is a reply to message #84228] |
Wed, 12 May 2010 15:17   |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
here was the development and history of this jig
http://gmcmotorhome.info/front.html#ZERK
I will link your step by step instructions also.
I think Emery had some also, but were a GMCMI publication
gene
On Wed, May 12, 2010 at 12:43 PM, Larry <weidnerl@wwt.net> wrote:
>
>
> The FRONT BEARING DRILL FIXTURE is used to drill a grease hole in the front
> knuckle so that you can grease the front wheel bearings without taking the
> knuckle apart.
>
> The tool can be found at Jimmy K's site:
>
> http://www.appliedgmc.com/prod.itml/icOid/835
>
> I borrowed the FRONT BEARING DRILL FIXTURE from a friend, but no directions
> came with the tool. So, here are some directions and a set of pics.
>
> Jimmy K...look at this and see if I got anything wrong.
>
> Pics are at this URL:
>
> http://www.gmcmhphotos.com/photos/misc.php?action=orderphotos&s=&cat=5464
>
> Otherwise, Hope this helps someone...
> --
> Larry :)
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
| Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. lookat this) [message #84251 is a reply to message #84240] |
Wed, 12 May 2010 16:51 |
 |
hnielsen2
Messages: 1434
Registered: February 2004
Location: Alpine CA
Karma: 0
|
Senior Member |
|
|
You could also us Chuck Alger's tool and not drill.
Howard
----- Original Message -----
From: "Mr.erf ERFisher" <mr.erfisher@gmail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Wednesday, May 12, 2010 1:17 PM
Subject: Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. lookat
this)
here was the development and history of this jig
http://gmcmotorhome.info/front.html#ZERK
I will link your step by step instructions also.
I think Emery had some also, but were a GMCMI publication
gene
On Wed, May 12, 2010 at 12:43 PM, Larry <weidnerl@wwt.net> wrote:
>
>
> The FRONT BEARING DRILL FIXTURE is used to drill a grease hole in the
> front
> knuckle so that you can grease the front wheel bearings without taking the
> knuckle apart.
>
> The tool can be found at Jimmy K's site:
>
> http://www.appliedgmc.com/prod.itml/icOid/835
>
> I borrowed the FRONT BEARING DRILL FIXTURE from a friend, but no
> directions
> came with the tool. So, here are some directions and a set of pics.
>
> Jimmy K...look at this and see if I got anything wrong.
>
> Pics are at this URL:
>
> http://www.gmcmhphotos.com/photos/misc.php?action=orderphotos&s=&cat=5464
>
> Otherwise, Hope this helps someone...
> --
> Larry :)
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|
|
| Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) [message #84255 is a reply to message #84242] |
Wed, 12 May 2010 17:51 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
sure , great idea
gene
On Wed, May 12, 2010 at 1:42 PM, Larry <weidnerl@wwt.net> wrote:
>
>
> Mr ERFisher wrote on Wed, 12 May 2010 15:17
> > here was the development and history of this jig
> > http://gmcmotorhome.info/front.html#ZERK
> >
> > I will link your step by step instructions also.
> >
> > I think Emery had some also, but were a GMCMI publication
> >
> > gene
>
> Gene,
> Ok if I add your link to my album?
> --
> Larry :)
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Using the FRONT BEARING DRILL FIXTURE (Jimmy K. look at this) [message #84275 is a reply to message #84255] |
Wed, 12 May 2010 20:32 |
Larry
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
|
Senior Member |
|
|
| Mr ERFisher wrote on Wed, 12 May 2010 17:51 |
sure , great idea
gene
On Wed, May 12, 2010 at 1:42 PM, Larry <weidnerl@wwt.net> wrote:
>
>
> Mr ERFisher wrote on Wed, 12 May 2010 15:17
> > here was the development and history of this jig
> > http://gmcmotorhome.info/front.html#ZERK
> >
> > I will link your step by step instructions also.
> >
> > I think Emery had some also, but were a GMCMI publication
> >
> > gene
>
> Gene,
> Ok if I add your link to my album?
> --
> Larry 
|
Gene,
Done!!
http://www.gmcmhphotos.com/photos/showphoto.php?photo=33853&nocache=1
Larry
78 Royale w/500 Caddy
Menomonie, WI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
