Home » Public Forums » GMCnet » Help for Steve F. (or the real reason)
| Help for Steve F. [message #80042] |
Sat, 10 April 2010 17:40  |
g.winger
Messages: 792
Registered: February 2008
Location: Warrenton,Missouri
Karma: 0
|
Senior Member |
|
|
Dear Steve, I know the real reason for the sale of your beautiful GMC. You've run out of things to do to it!! So, I thought I would help you and I'm sure others will pipe in.
First,,motivation. Even if it has low miles I'm sure you'll want to "freshen" it up,,,so a Cad 540 stroker would work. No, NO, that won't work. I know, one of Dave Lenzi's kits and an L18 is the ticket. Ya that will work. Ok lets make a list,,, and since its gona GO really well, well you know whats next,,,,
12" front rotors{Hubler conversion},,check,,
4 discs on rears,,,check
Reaction arm,,,check
4 bager,,,check
Hot shots,,,check,,(how am I doing so far??)
New rubber,,check(of course)
Intermintent wipers from Ken H.,,check
Ok, I'll stop now,,,got alot more ideas. Now all I need to know is WHEN, I,ll ask for the time off because thats just TOO much fun for you to have all by your self. I,m glad I could help,,best regards,,,Paul{very envious) Leavitt
|
|
|
|
| Re: [GMCnet] Help for Steve F. [message #80078 is a reply to message #80042] |
Sat, 10 April 2010 23:08  |
Steven Ferguson
Messages: 3447
Registered: May 2006
Karma: 0
|
Senior Member |
|
|
Hmmmmmm,
Maybe you have something here. I like it all except for the engine
choice. I have a fresh .030 HO 502 (actually, 509 cu in) engine
sitting on a stand in the shop that I'd love to have in a '23.
On Sat, Apr 10, 2010 at 3:40 PM, Paul Leavitt <leavittpaul@yahoo.com> wrote:
>
>
> Dear Steve, I know the real reason for the sale of your beautiful GMC. You've run out of things to do to it!! So, I thought I would help you and I'm sure others will pipe in.
> First,,motivation. Even if it has low miles I'm sure you'll want to "freshen" it up,,,so a Cad 540 stroker would work. No, NO, that won't work. I know, one of Dave Lenzi's kits and an L18 is the ticket. Ya that will work. Ok lets make a list,,, and since its gona GO really well, well you know whats next,,,,
>
> 12" front rotors{Hubler conversion},,check,,
> 4 discs on rears,,,check
> Reaction arm,,,check
> 4 bager,,,check
> Hot shots,,,check,,(how am I doing so far??)
> New rubber,,check(of course)
> Intermintent wipers from Ken H.,,check
> Ok, I'll stop now,,,got alot more ideas. Now all I need to know is WHEN, I,ll ask for the time off because thats just TOO much fun for you to have all by your self. I,m glad I could help,,best regards,,,Paul{very envious) Leavitt
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: Help for Steve F. [message #80111 is a reply to message #80042] |
Sun, 11 April 2010 09:05 |
g.winger
Messages: 792
Registered: February 2008
Location: Warrenton,Missouri
Karma: 0
|
Senior Member |
|
|
|
Hmmm,,,siamesed bore,,short stroke to bore ratio,,ya thatl work. still need some pieces from Dave L. I,ll help. Herd there's good riding in that area. Along with the S. West histoy. Herd that the house W. Earp rented/owned burnt a couple years ago. Best wishes,,,PL
|
|
|
|
| Re: [GMCnet] Help for Steve F. [message #80119 is a reply to message #80111] |
Sun, 11 April 2010 09:31 |
Steven Ferguson
Messages: 3447
Registered: May 2006
Karma: 0
|
Senior Member |
|
|
Paul,
This area, Cochise county, has been a favorite destination for bikers
for a lot more years than I've been here. Beautiful roads, and plenty
of interesting destinations. I'm surprised Dan and Terry haven't
geocached this place to oblivion. Much to do, much to see.
On Sun, Apr 11, 2010 at 7:05 AM, Paul Leavitt <leavittpaul@yahoo.com> wrote:
>
>
> Hmmm,,,siamesed bore,,short stroke to bore ratio,,ya thatl work. still need some pieces from Dave L. I,ll help. Herd there's good riding in that area. Along with the S. West histoy. Herd that the house W. Earp rented/owned burnt a couple years ago. Best wishes,,,PL
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Sun Nov 17 01:37:59 CST 2024
Total time taken to generate the page: 0.01419 seconds
|
GMCforum
Search
Help
Register
Login
Home
