|
Re: Jim K website link check [message #77003 is a reply to message #77002] |
Wed, 17 March 2010 21:50 |
bukzin
Messages: 840 Registered: April 2004 Location: North California
Karma: 0
|
Senior Member |
|
|
I am on my Apple 'MacBook Pro'
and using the Firefox browser.
(not sure if that would make any difference)
Just checked and neither of those
links will open for me.
Bukzin
1977 Palm Beach
|
|
|
|
|
|
Re: Jim K website link check [message #77010 is a reply to message #77002] |
Wed, 17 March 2010 22:00 |
Rusty
Messages: 197 Registered: October 2005 Location: Philadelphia Pa
Karma: 0
|
Senior Member |
|
|
Dave thanks but I was more interested in folks trying the links I posted so I can get back to Jim K's staff that they need to check again because NOBODY can get to those links.
Rusty
75 Glenbrook
Philadelphia Pa
|
|
|
Re: Jim K website link check [message #77011 is a reply to message #77002] |
Wed, 17 March 2010 22:19 |
Rusty
Messages: 197 Registered: October 2005 Location: Philadelphia Pa
Karma: 0
|
Senior Member |
|
|
Emery yes I see that. The point I was trying to make was, if you click on the link below, its the page I was on - scroll down to the Quadrabag - then click on the links in that section. They are the ones that dont work
http://www.appliedgmc.com/level.itml/icOid/478
Jes trying to help out JimK clean up his website thats all . . .
Rusty
75 Glenbrook
Philadelphia Pa
|
|
|
Re: [GMCnet] Jim K website link check [message #77018 is a reply to message #77002] |
Wed, 17 March 2010 23:01 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Rusty,
I went to the main site and then clicked on Instructions and came up with
these:
http://www.appliedgmc.com/images/Brown_QuadraBag_Installation.pdf
http://www.appliedgmc.com/images/quad_diagram.jpg
Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Rusty
Sent: Thursday, 18 March 2010 1:43 PM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Jim K website link check
I was looking at some Q-bag installation instructions on JimK's website.
There appear to be broken links. I get nothin':
http://www.appliedgmc.com/instructions/quad_bag.pdf
http://www.appliedgmc.com/cgif/quad_diagram.jpg
Can anybody see these diagrams? I emailed his staff, they emailed me back
saying they checked these links and they were OK, it was on my end. I still
get err messages 'broken link'
?
--
Rusty
75 Glenbrook
Philadelphia Pa
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
Re: [GMCnet] Jim K website link check [message #77128 is a reply to message #77079] |
Thu, 18 March 2010 16:54 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
We had it fixed, but the problem is in the way it works when there is
any changes made, it cuts the link.
We will need to come up with a solution.
Meanwhile it is functioning.
On Thu, Mar 18, 2010 at 9:13 AM, Mike Miller <m000035@gmail.com> wrote:
>
>
> Rusty wrote on Wed, 17 March 2010 19:43
>> I was looking at some Q-bag installation instructions on JimK's website. There appear to be broken links. I get nothin':
>>
>> http://www.appliedgmc.com/instructions/quad_bag.pdf
>>
>> http://www.appliedgmc.com/cgif/quad_diagram.jpg
>>
>> Can anybody see these diagrams? I emailed his staff, they emailed me back saying they checked these links and they were OK, it was on my end. I still get err messages 'broken link'
>>
>> ?
>
>
> The only links that do not work for me are the ones IN THE ABOVE MESSAGE. When I go to the Applied website I can click on anything and it works just fine. The links DO look alike... just the ones cut and pasted into the message do not work!
>
> I cut these from the site... seem to work just fine!
> http://www.appliedgmc.com/images/quad_diagram.jpg
> http://www.appliedgmc.com/images/Brown_QuadraBag_Installation.pdf
>
> --
> Mike Miller
> `73 26' X Painted D.
> `78 23' Birchaven
> Hillsboro, OR
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] Jim K website link check [message #77131 is a reply to message #77128] |
Thu, 18 March 2010 17:01 |
k2gkk
Messages: 4452 Registered: November 2009
Karma: -8
|
Senior Member |
|
|
USUALLY, but not always, enclosing URLs in parentheses
will help them to stay together and not get broken up.
(http://www.appliedgmc.com/images/quad_diagram.jpg)
(http://www.appliedgmc.com/images/Brown_QuadraBag_Installation.pdf)
Mac Macdonald
Oklahoma City
> Date: Thu, 18 Mar 2010 14:54:16 -0700
> From: jimkanomata@gmail.com
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Jim K website link check
>
> We had it fixed, but the problem is in the way it works when there is
> any changes made, it cuts the link.
> We will need to come up with a solution.
> Meanwhile it is functioning.
>
> On Thu, Mar 18, 2010 at 9:13 AM, Mike Miller <m000035@gmail.com> wrote:
>>
>>
>> Rusty wrote on Wed, 17 March 2010 19:43
>>> I was looking at some Q-bag installation instructions on JimK's website. There appear to be broken links. I get nothin':
>>>
>>> http://www.appliedgmc.com/instructions/quad_bag.pdf
>>>
>>> http://www.appliedgmc.com/cgif/quad_diagram.jpg
>>>
>>> Can anybody see these diagrams? I emailed his staff, they emailed me back saying they checked these links and they were OK, it was on my end. I still get err messages 'broken link'
>>>
>>> ?
>>
>>
>> The only links that do not work for me are the ones IN THE ABOVE MESSAGE. When I go to the Applied website I can click on anything and it works just fine. The links DO look alike... just the ones cut and pasted into the message do not work!
>>
>> I cut these from the site... seem to work just fine!
>> http://www.appliedgmc.com/images/quad_diagram.jpg
>> http://www.appliedgmc.com/images/Brown_QuadraBag_Installation.pdf
>>
>> --
>> Mike Miller
>> `73 26' X Painted D.
>> `78 23' Birchaven
>> Hillsboro, OR
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: Jim K website link check [message #77192 is a reply to message #77002] |
Fri, 19 March 2010 05:46 |
Rusty
Messages: 197 Registered: October 2005 Location: Philadelphia Pa
Karma: 0
|
Senior Member |
|
|
SUCCESS ! after emailing them I got this email today from Applied GMC Staff:
"We thought it was the other link!!
I passed this on to our website administrator and he will take care of it. The instructions are also located on the instructions page.
Thanks,
Applied Air Filters/GMC
47626 Kato Rd.
Fremont, CA 94538"
and those links are now working. Jim will be happy his staff is so responsive. Me, I'm just a regular guy with a touch of OCD
Rusty
75 Glenbrook
Philadelphia Pa
|
|
|