GMCforum: GMCnet » Stopping Distance????

Home » Public Forums » GMCnet » Stopping Distance????

Show: Today's Messages :: Polls :: Message Navigator

Stopping Distance???? [message #76709]

Mon, 15 March 2010 10:59

g.winger

Messages: 792
Registered: February 2008
Location: Warrenton,Missouri

Karma: 0

Senior Member

Before one of the rallys I thought I saw a post from Jim K. that they were going to have a "stopping contest". Did this ever happen?? Has any one measured the stopping distance before and after the addition of more disks?? larger MC??? Reaction arm?? Who was it that shot the paint ball onto the ground off of the front bumper??? Will their be a contest at Montgomery??? Can"t wait to try out those new 12" front brakes!!!!! Wish I measured the distance from 50 or 60mph.

Paul{ who just bled the new brakes by hisself because she said her leg gets tired even with the engine running(power)} Leavitt

Report message to a moderator

Re: Stopping Distance???? [message #76718 is a reply to message #76709]

Mon, 15 March 2010 11:41

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

PAul, I hope you got them bled completely. It is a tough job when having two people. We just did mine a couple of months back when replacing a master cylender. Every time we would give it just "one more" another bubble.
Hope you were successful.
Dan
hooking up with Jim @ Lordsburg now

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: Stopping Distance???? [message #76725 is a reply to message #76709]

Mon, 15 March 2010 12:15

fred v

Messages: 999
Registered: April 2006
Location: pensacola, fl.

Karma: 0

Senior Member

the paint ball deal was Ken Henderson. he did it here with several of us helping. i cannot remember the distances.

Fred V
'77 Royale RB 455
P'cola, Fl

Report message to a moderator

Re: [GMCnet] Stopping Distance???? [message #76726 is a reply to message #76709]

Mon, 15 March 2010 12:13

GMCWiperMan

Messages: 1248
Registered: December 2007

Karma: 1

Senior Member

Paul,

Here's the paint ball event:
http://www.gmcmhphotos.com/photos/showgallery.php?cat=4642

<http://www.gmcmhphotos.com/photos/showgallery.php?cat=4642>If you'd had the
"pneumatic pedal puller" installed like I used for those tests, you could
have used it to bleed your brakes. With a valve in hand to supply air to
the cylinder, you're in complete control of the process so no getting mixed
up with "Down & Open" vs "Open & Up". :-) Also makes an all-brakes active
parking brake easy -- just add a small compressor to keep the pedal down
when parked.

Ken H.

On Mon, Mar 15, 2010 at 11:59 AM, Paul Leavitt <leavittpaul@yahoo.com>wrote:

>
>
> Before one of the rallys I thought I saw a post from Jim K. that they were
> going to have a "stopping contest". Did this ever happen?? Has any one
> measured the stopping distance before and after the addition of more disks??
> larger MC??? Reaction arm?? Who was it that shot the paint ball onto the
> ground off of the front bumper??? Will their be a contest at Montgomery???
> Can"t wait to try out those new 12" front brakes!!!!! Wish I measured the
> distance from 50 or 60mph.
>
> Paul{ who just bled the new brakes by hisself because she said her leg
> gets tired even with the engine running(power)} Leavitt
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Stopping Distance???? [message #76762 is a reply to message #76718]

Mon, 15 March 2010 18:33

Steven Ferguson

Messages: 3447
Registered: May 2006

Karma: 0

Senior Member

Dan,
Tell Jim linda is PISSED!

On Mon, Mar 15, 2010 at 9:41 AM, Dan Gregg <gregg_dan@hotmail.com> wrote:
>
>
> PAul, I hope you got them bled completely. It is a tough job when having two people. We just did mine a couple of months back when replacing a master cylender. Every time we would give it just "one more" another bubble.
> Hope you were successful.
> Dan
> hooking up with Jim @ Lordsburg now
> --
> Dan & Teri Gregg
>
> danandteri.blogspot.com
>
>
>
> ///Halon Automatic Fire Extinguishers
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	Brake Contest????
Next Topic:	Travel on CA Highway 1 - Advisable?

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 17 02:32:23 CST 2024

Total time taken to generate the page: 0.01001 seconds