GMCforum: GMCnet » Plastic Heat duct part

Home » Public Forums » GMCnet » Plastic Heat duct part

Show: Today's Messages :: Polls :: Message Navigator

Plastic Heat duct part [message #73160]

Sun, 07 February 2010 11:33

jwillard

Messages: 118
Registered: May 2004
Location: Silver City, NM

Karma: 0

Senior Member

I have a plastic Heater Duct that attaches to the floor and the side of the Sink cabinet. It's intended to be a Cold air return and I beleive there was another piece that attached to the square opening for a outlet vent. I have the barrel chairs in my coach and it sits right under the rear of the two seats. My ductwork has changes so I no longer need this.

Need to clean out the shop a bit and I hate to see parts that are getting harder and harder to come by, go to the dump. Contact me if this is something you can use. Make an offer. Pictures are here...
http://www.gmcmhphotos.com/photos/showgallery.php?cat=5398

Jeff Willard
Silver City, NM
1973 ex-Glacier

Report message to a moderator

Re: [GMCnet] Plastic Heat duct part [message #73208 is a reply to message #73160]

Sun, 07 February 2010 17:26

Kingsley Coach

Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada

Karma: -34

Senior Member

What Jeff has here is a fairly un-common piece...it's used on 26-11 models
for one...
If no bids, Jeff, save it for me <VBG>

Mike in NS with a 26-11 floor plan

On Sun, Feb 7, 2010 at 1:33 PM, Jeff Willard <jwillard@oac-inc.com> wrote:

>
>
> I have a plastic Heater Duct that attaches to the floor and the side of the
> Sink cabinet. It's intended to be a Cold air return and I beleive there was
> another piece that attached to the square opening for a outlet vent. I have
> the barrel chairs in my coach and it sits right under the rear of the two
> seats. My ductwork has changes so I no longer need this.
>
> Need to clean out the shop a bit and I hate to see parts that are getting
> harder and harder to come by, go to the dump. Contact me if this is
> something you can use. Make an offer. Pictures are here...
> http://www.gmcmhphotos.com/photos/showgallery.php?cat=5398
> --
> Jeff Willard
> Silver City, NM
> 1973 ex-Glacier
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Plastic Heat duct part [message #73263 is a reply to message #73208]

Mon, 08 February 2010 11:01

jwillard

Messages: 118
Registered: May 2004
Location: Silver City, NM

Karma: 0

Senior Member

If you want it for freight costs, just let me know. It's clean out time and don't want to just take it to the dump.

Jeff Willard
Silver City, NM
1973 ex-Glacier

Report message to a moderator

Re: [GMCnet] Plastic Heat duct part [message #73265 is a reply to message #73263]

Mon, 08 February 2010 11:05

Kingsley Coach

Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada

Karma: -34

Senior Member

Jeff

I'll get you to send it to Las Cruces ...I'll give you the address off line.
Mike

On Mon, Feb 8, 2010 at 1:01 PM, Jeff Willard <jwillard@oac-inc.com> wrote:

>
>
> If you want it for freight costs, just let me know. It's clean out time and
> don't want to just take it to the dump.
> --
> Jeff Willard
> Silver City, NM
> 1973 ex-Glacier
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	OEM Vacuum System
Next Topic:	Rear View Camera Recommendations

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Sep 21 02:34:41 CDT 2024

Total time taken to generate the page: 0.02227 seconds