GMCforum: GMCnet » Re: [GMCnet] Trans service

Home » Public Forums » GMCnet » Re: [GMCnet] Trans service

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Trans service [message #72595]

Tue, 02 February 2010 10:01

David L Greenberg

Messages: 899
Registered: January 2004
Location: Port St Lucie, FL

Karma: 0

Senior Member

On Tue, 02 Feb 2010 09:41:38 -0500 Les Burt <burtco99@yahoo.com> writes:
> For those of you with the Ragusa Transmission Pan, Does the lower
> bottom
> present any concern regarding road obstacles? Being that the Ragusa
> pan is
> aluminum, I'd be afraid of cracking it should I encounter an
> unexpected
> obstacle. The stock steel pan would just dent under moderate
> impact.
>

I put tens of thousands of miles on my Ragusa tranny pan and had no
problems.
BUT, be careful with speed bumps-take them very slowly because in most
cases
when you come off the bump the pan is right there.

The advantages of the extra qt capacity, the fins for cooling and the
ability to
install a tranny temp gage make it worthwhile in my opinion.

David Lee Greenberg
Port St Lucie, FL
Dedicated to the Preservation of the Classic GMC Motorhome
http://GMCmhRegistry.com
http://www.picturetrail.com/gmcregistry
____________________________________________________________
Weight Loss Program
Best Weight Loss Program - Click Here!
http://thirdpartyoffers.juno.com/TGL2141/c?cp=aIVDY7PNYXprtfSkEpkdZAAAJ1Csyv5OnZl2mKFYY98JLnqKAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAEUgAAAAA=
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Dave Greenberg
Dedicated to the Preservation of the GMC Clasic
http:GMCmhRegistry.com davegreenberg1@juno.com

Report message to a moderator

Previous Topic:	[GMCnet] Fw: Brochures of all the cars you've ever owned (non GMC)
Next Topic:	[GMCnet] glenngiere@gmail.com

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 19:32:01 CST 2024

Total time taken to generate the page: 0.01011 seconds