GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] creative cooler installation
Re: [GMCnet] creative cooler installation [message #92448 is a reply to message #92397] Sun, 18 July 2010 17:48 Go to previous messageGo to previous message
George Beckman is currently offline  George Beckman   United States
Messages: 1085
Registered: October 2008
Location: Colfax, CA
Karma:
Senior Member
Kingsley Coach wrote on Sun, 18 July 2010 11:11

Netters


of work for the rad to do....

So to take some of the strain off of the radiator has anyone figured out
where to put some of these 'coolers' other than in front of the
radiator....maybe combined with an electric fan???

Just askin' !

Thanks

Mike in NS





I believe you are correct. It is a wonder any air is left for the engine. No wonder the fan clutch has to come one... it needs to pull air though a maze.

I just installed an engine oil cooler. It is to the right of the air conditioning dryer, basically in front of the grill in front of the batteries. I am a little ashamed of the bracket I made, but it is sort of an experiment. The oil goes through this cooler and then into the radiator. I did it that way to 1) give the radiator a small break and 2) to keep the engine oil from getting to cool in cool weather. We are heading Oregon way, and I figure it will probably be 950 degrees in Redding, CA. The climb up to Grant's pass, Oregon will test the theory.


'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Bargains
Next Topic: Electric Radiator Fans: Practical cooling from the mens mall to your coach! Part II
Goto Forum:
  


Current Time: Sat Oct 05 15:56:44 CDT 2024

Total time taken to generate the page: 0.00942 seconds