Re: [GMCnet] creative cooler installation [message #92443 is a reply to message #92406] |
Sun, 18 July 2010 17:00 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma:
|
Senior Member |
|
|
Kingsley Coach wrote on Sun, 18 July 2010 13:29 | Ken
I assume you're talking about a trans cooler...I don't suppose you have a picture??? <g>
I'd go look at possible locations, but its 90* with 78% humidity...today is a theory day !
Thanks Ken
Mike in NS
|
I do not have a picture but here is a picture of Blaine's lower radiator guard installed on a GMC.
http://www.bdub.net/blainemerrell/index.html
Just picture a trans cooler mounted on the inside of the guard. Blane makes them with room to bottom mount a vertical cooler or in my case I have mine just mounted on stand-offs to the angled surface of the cooler. You can get those stand-offs for mounting coolers at most auto parts stores for a few of dollars. They are just round plastic discs about the size of a quarter, or should I say "looney", and they have something like a cable tie going through the center of them to tighten them down.
http://www.jegs.com/i/JEGS/555/53500/10002/-1?CT=999
Here is a set that is square instead of round.
http://www.amazon.com/80278-Transmission-Cooler-Mounting-Kit/dp/B00029WR7S
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|