| Re: Electric Radiator Fans: Practical cooling from the mens mall to your coach! Part II [message #90852 is a reply to message #90802] |
Fri, 02 July 2010 13:45   |
|
|
if you get the CS-144 off of a mid 90s caddy they have the same 6/12 ear spacing, the only thing is they use a larger M10 bolt, so some clearancing of the lower bracket may be needed. the wiring part is the easiest, just get Napa part EC-82 which has a 50 ohm resistor, and plugs right nto the stock harness, no cutting or anything needed.
Also if you take the charge cable off the doner caddy you will have the proper cable needed and theres enough to make it work. also the V belt pulley off the old alt will fit just fine. I'm gonna try the single belt first since the regulator is soft start it wont instantly load the system. also using good blets is a must, I use Gates.
| Keith V wrote on Fri, 02 July 2010 07:43 |
What does it take to mount a Cs140 on the 455?
It seems like a lot of bracket modification would be required.
|
73 Canyon Lands, (a.k.a. The Yellow Submarine) West Los Angeles CA
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
