GMCforum: GMCnet » [GMCnet] Fw: 2/4 bagger

Home » Public Forums » GMCnet » [GMCnet] Fw: 2/4 bagger

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Fw: 2/4 bagger [message #77607 is a reply to message #76959]

Mon, 22 March 2010 01:28

Luvn737s

Messages: 1106
Registered: June 2007

Karma:

Senior Member

My concern with any modification of the original design is that the load it being carried from the wheels through the bogie arms to the airspring. In the modified (4bag/Qbag) design, the stoutness of the bogie arm inevitably gets reduced to much thinner material that is bolted in place.

I am not an engineer, but I do know that any design is only as good as the weakest part. I have a hard time understanding how the components of the modified systems are as strong as the simple bogie and airspring. Perhaps the load analysis proves it's more than adequate, but just eyeballing it, it still looks like it needs to be as stout as the bogie arm.

Randy
1973 26' Painted Desert
Ahwatukee (Phoenix) AZ

Report message to a moderator

[Message index]

		[GMCnet] Fw: 2/4 bagger By: Mark Torgerson on Wed, 17 March 2010 15:10
		Re: [GMCnet] Fw: 2/4 bagger By: Nelson Wright on Wed, 17 March 2010 15:49
		Re: [GMCnet] Fw: 2/4 bagger By: WD0AFQ on Wed, 17 March 2010 16:49
		Re: [GMCnet] Fw: 2/4 bagger By: Mr ERFisher on Wed, 17 March 2010 18:00
		Re: [GMCnet] Fw: 2/4 bagger By: Byron Songer on Wed, 17 March 2010 23:25
		Re: [GMCnet] Fw: 2/4 bagger By: jimk on Wed, 17 March 2010 23:33
		Re: [GMCnet] Fw: 2/4 bagger By: Steven Ferguson on Thu, 18 March 2010 05:30
		Re: [GMCnet] Fw: 2/4 bagger By: Jim Bounds on Thu, 18 March 2010 22:27
		Re: [GMCnet] Fw: 2/4 bagger By: jimk on Thu, 18 March 2010 23:10
		Re: [GMCnet] Fw: 2/4 bagger By: Mark Torgerson on Fri, 19 March 2010 02:12
		Re: [GMCnet] Fw: 2/4 bagger By: Jim Bounds on Fri, 19 March 2010 07:11
		Re: [GMCnet] Fw: 2/4 bagger By: Mr ERFisher on Fri, 19 March 2010 09:12
		Re: [GMCnet] Fw: 2/4 bagger By: WD0AFQ on Fri, 19 March 2010 09:43
		Re: [GMCnet] Fw: 2/4 bagger By: Gary Berry on Fri, 19 March 2010 09:24
		Re: [GMCnet] Fw: 2/4 bagger By: Jim Bounds on Fri, 19 March 2010 12:20
		Re: [GMCnet] Fw: 2/4 bagger By: Jim Bounds on Fri, 19 March 2010 09:58
		Re: [GMCnet] Fw: 2/4 bagger By: Mark Torgerson on Fri, 19 March 2010 00:32
		Re: [GMCnet] Fw: 2/4 bagger By: Steven Ferguson on Fri, 19 March 2010 06:59
		Re: [GMCnet] Fw: 2/4 bagger By: jimk on Fri, 19 March 2010 22:36
		Re: [GMCnet] Fw: 2/4 bagger By: Mark Torgerson on Sun, 21 March 2010 00:33
		Re: [GMCnet] Fw: 2/4 bagger By: zhagrieb on Sun, 21 March 2010 00:43
		Re: [GMCnet] Fw: 2/4 bagger By: jayrabe on Sun, 28 March 2010 15:48
		Re: [GMCnet] Fw: 2/4 bagger By: zhagrieb on Sun, 28 March 2010 23:08
		Re: [GMCnet] Fw: 2/4 bagger By: Nelson Wright on Sun, 21 March 2010 07:59
		Re: [GMCnet] Fw: 2/4 bagger By: jimk on Sun, 21 March 2010 08:21
		Re: [GMCnet] Fw: 2/4 bagger By: Steven Ferguson on Sun, 21 March 2010 12:17
		Re: [GMCnet] Fw: 2/4 bagger By: van.one on Sun, 21 March 2010 10:19
		Re: [GMCnet] Fw: 2/4 bagger By: Mark Torgerson on Sun, 21 March 2010 13:25
		Re: [GMCnet] Fw: 2/4 bagger By: Jim Bounds on Sun, 21 March 2010 15:59
		Re: [GMCnet] Fw: 2/4 bagger By: WD0AFQ on Sun, 21 March 2010 16:43
		Re: [GMCnet] Fw: 2/4 bagger By: Nelson Wright on Sun, 21 March 2010 17:21
		Re: [GMCnet] Fw: 2/4 bagger By: Mark Torgerson on Sun, 21 March 2010 18:48
		Re: [GMCnet] Fw: 2/4 bagger By: jimk on Sun, 21 March 2010 22:36
		Re: [GMCnet] Fw: 2/4 bagger By: Steven Ferguson on Mon, 22 March 2010 06:27
		Re: [GMCnet] Fw: 2/4 bagger By: Byron Songer on Sun, 21 March 2010 16:49
		Re: [GMCnet] Fw: 2/4 bagger By: Jim Bounds on Sun, 21 March 2010 17:13
		Re: [GMCnet] Fw: 2/4 bagger By: Mark Torgerson on Sun, 21 March 2010 17:34
		Re: [GMCnet] Fw: 2/4 bagger By: Ken Burton on Sun, 21 March 2010 23:13
		Re: [GMCnet] Fw: 2/4 bagger By: USAussie on Sun, 21 March 2010 23:24
		Re: [GMCnet] Fw: 2/4 bagger By: Ken Burton on Sun, 21 March 2010 23:50
		Re: [GMCnet] Fw: 2/4 bagger By: Ken Burton on Sun, 21 March 2010 23:51
		Re: [GMCnet] Fw: 2/4 bagger By: Luvn737s on Mon, 22 March 2010 01:28

Previous Topic:	GMC MH Belt Buckle
Next Topic:	Re: [GMCnet] GMC MH Belt Buckle

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 07:03:54 CDT 2024

Total time taken to generate the page: 0.04167 seconds