GMCforum: GMCnet » Jim Kanomata's Caddy Motor clone

Home » Public Forums » GMCnet » Jim Kanomata's Caddy Motor clone

Show: Today's Messages :: Polls :: Message Navigator

Re: Jim Kanomata's Caddy Motor clone [message #70725 is a reply to message #70656]

Wed, 13 January 2010 11:24

Jim Wagner

Messages: 339
Registered: February 2004
Location: Brook Park, Oh

Karma:

Senior Member

And I thought we had a problem when a piece of piston broke off on Sandys Vette and closed the plug gap.
Jim Wagner
Brook Park, oh

Gary,
I also thought that but Jim says the motor is around 8:1. That is a
lot of clearance so I'm thinking he'll also need a new crank and
perhaps a new set of rods. None the less, it will be interesting to
read the post mortem.

Report message to a moderator

[Message index]

		Jim Kanomata's Caddy Motor clone By: Jim Wagner on Tue, 12 January 2010 17:14
		Re: [GMCnet] Jim Kanomata's Caddy Motor clone By: jimk on Tue, 12 January 2010 19:48
		Re: [GMCnet] Jim Kanomata's Caddy Motor clone By: WD0AFQ on Tue, 12 January 2010 19:58
		Re: [GMCnet] Jim Kanomata's Caddy Motor clone By: jimk on Tue, 12 January 2010 20:46
		Re: [GMCnet] Jim Kanomata's Caddy Motor clone By: Kosier on Tue, 12 January 2010 22:45
		Re: [GMCnet] Jim Kanomata's Caddy Motor clone By: Steven Ferguson on Wed, 13 January 2010 08:08
		Re: Jim Kanomata's Caddy Motor clone By: Duce Apocalypse on Tue, 12 January 2010 22:28
		Re: Jim Kanomata's Caddy Motor clone By: Jim Wagner on Wed, 13 January 2010 11:24
		Re: [GMCnet] Jim Kanomata's Caddy Motor clone By: comcast on Wed, 13 January 2010 13:50

Previous Topic:	Re: [GMCnet] Quartzsite and Converted Bus Group
Next Topic:	Hmn (mystery)drain on power system?

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jun 26 11:05:20 CDT 2024

Total time taken to generate the page: 0.00787 seconds