GMCforum: GMCnet » Vacuum Advance

Home » Public Forums » GMCnet » Vacuum Advance

Show: Today's Messages :: Polls :: Message Navigator

Re: Vacuum Advance [message #65915 is a reply to message #65914]

Sun, 29 November 2009 08:31

mdryan

Messages: 27
Registered: March 2008
Location: Seattle

Karma:

Junior Member

It's pretty straight forward -
1. Vacuum advance will always draw vacuum upstream of the throttle butterfly - vacuum increases as throttle opens
2. Vacuum retard draws vacuum downstream of the butterfly - vacuum decreases as throttle opens.

MDR

Mark Ryan 1978 Kingsley Pac. Northwest

[Updated on: Sun, 29 November 2009 08:52]

Report message to a moderator

[Message index]

		Vacuum Advance By: jwillard on Sat, 28 November 2009 12:46
		Re: Vacuum Advance By: rgleas on Sat, 28 November 2009 12:58
		Re: Vacuum Advance By: Ken Burton on Sat, 28 November 2009 14:02
		Re: Vacuum Advance By: rgleas on Sat, 28 November 2009 14:38
		Re: [GMCnet] Vacuum Advance By: Steven Ferguson on Sat, 28 November 2009 16:18
		Re: [GMCnet] Vacuum Advance By: Ken Burton on Sat, 28 November 2009 17:10
		Re: [GMCnet] Vacuum Advance By: jwillard on Sat, 28 November 2009 17:51
		Re: [GMCnet] Vacuum Advance By: dmumert on Sat, 28 November 2009 18:22
		Re: [GMCnet] Vacuum Advance By: rgleas on Sat, 28 November 2009 20:06
		Re: [GMCnet] Vacuum Advance By: Gary Casey on Sat, 28 November 2009 20:50
		Re: [GMCnet] Vacuum Advance By: Ken Burton on Sun, 29 November 2009 15:45
		Re: Vacuum Advance By: rgleas on Sat, 28 November 2009 17:37
		Re: Vacuum Advance By: Ken Burton on Sat, 28 November 2009 22:09
		Re: Vacuum Advance By: Matt Colie on Sun, 29 November 2009 06:55
		Re: Vacuum Advance By: JohnL455 on Sat, 28 November 2009 18:57
		Re: Vacuum Advance By: JohnL455 on Sun, 29 November 2009 08:09
		Re: Vacuum Advance By: rgleas on Sun, 29 November 2009 08:25
		Re: Vacuum Advance By: mdryan on Sun, 29 November 2009 08:31
		Re: Vacuum Advance By: Ken Burton on Sun, 29 November 2009 08:44
		Re: Vacuum Advance By: Pete Papas on Sun, 29 November 2009 09:02
		Re: Vacuum Advance By: Ken Burton on Sun, 29 November 2009 09:22
		Re: Vacuum Advance By: jwillard on Sun, 29 November 2009 09:56
		Re: Vacuum Advance By: Ken Burton on Sun, 29 November 2009 14:39
		Re: Vacuum Advance By: roy1 on Sun, 29 November 2009 19:04
		Re: Vacuum Advance By: Ken Burton on Sun, 29 November 2009 23:29
		Re: [GMCnet] Vacuum Advance By: USAussie on Mon, 30 November 2009 01:01
		Re: [GMCnet] Vacuum Advance By: Ken Burton on Mon, 30 November 2009 01:53
		Re: [GMCnet] Vacuum Advance By: ljdavick on Mon, 30 November 2009 19:07
		Re: [GMCnet] Vacuum Advance By: mike miller on Mon, 30 November 2009 21:40
		Re: Vacuum Advance By: mdryan on Mon, 30 November 2009 08:01
		Re: [GMCnet] Vacuum Advance By: Jim Bounds on Mon, 30 November 2009 08:47
		Re: [GMCnet] Barbie GMC on eBay (#140362019346) By: k2gkk on Sun, 29 November 2009 11:06
		Re: [GMCnet] Vacuum Advance By: Steven Ferguson on Sun, 29 November 2009 15:49
		Re: Vacuum Advance By: fred v on Sun, 29 November 2009 14:23
		Re: Vacuum Advance By: Bob de Kruyff on Mon, 30 November 2009 16:32
		Re: Vacuum Advance By: Mike_H on Sat, 12 October 2019 10:21

Previous Topic:	[GMCnet] lower steering shaft complete new replacement
Next Topic:	Another "Not News to Us" article

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 23 20:29:48 CDT 2024

Total time taken to generate the page: 0.01175 seconds