GMCforum: GMCnet » Vacuum Advance

Home » Public Forums » GMCnet » Vacuum Advance

Show: Today's Messages :: Polls :: Message Navigator

Re: Vacuum Advance [message #65914 is a reply to message #65853]

Sun, 29 November 2009 08:25

rgleas

Messages: 48
Registered: May 2009
Location: Tulsa, Ok.

Karma:

Member

The TVS switch being mounted on the return housing is sensing tempature and will not know when the engine is at idle vs. wide open throttle. Logic would dictate that this switch is dealing with a hot vs. cold engine situation. I would also believe that it was an emmissions situation.

Having work on many engines with out all of the smog adaptations less advance on a cold engine will make it run smoother during warm up.

Report message to a moderator

[Message index]

		Vacuum Advance By: jwillard on Sat, 28 November 2009 12:46
		Re: Vacuum Advance By: rgleas on Sat, 28 November 2009 12:58
		Re: Vacuum Advance By: Ken Burton on Sat, 28 November 2009 14:02
		Re: Vacuum Advance By: rgleas on Sat, 28 November 2009 14:38
		Re: [GMCnet] Vacuum Advance By: Steven Ferguson on Sat, 28 November 2009 16:18
		Re: [GMCnet] Vacuum Advance By: Ken Burton on Sat, 28 November 2009 17:10
		Re: [GMCnet] Vacuum Advance By: jwillard on Sat, 28 November 2009 17:51
		Re: [GMCnet] Vacuum Advance By: dmumert on Sat, 28 November 2009 18:22
		Re: [GMCnet] Vacuum Advance By: rgleas on Sat, 28 November 2009 20:06
		Re: [GMCnet] Vacuum Advance By: Gary Casey on Sat, 28 November 2009 20:50
		Re: [GMCnet] Vacuum Advance By: Ken Burton on Sun, 29 November 2009 15:45
		Re: Vacuum Advance By: rgleas on Sat, 28 November 2009 17:37
		Re: Vacuum Advance By: Ken Burton on Sat, 28 November 2009 22:09
		Re: Vacuum Advance By: Matt Colie on Sun, 29 November 2009 06:55
		Re: Vacuum Advance By: JohnL455 on Sat, 28 November 2009 18:57
		Re: Vacuum Advance By: JohnL455 on Sun, 29 November 2009 08:09
		Re: Vacuum Advance By: rgleas on Sun, 29 November 2009 08:25
		Re: Vacuum Advance By: mdryan on Sun, 29 November 2009 08:31
		Re: Vacuum Advance By: Ken Burton on Sun, 29 November 2009 08:44
		Re: Vacuum Advance By: Pete Papas on Sun, 29 November 2009 09:02
		Re: Vacuum Advance By: Ken Burton on Sun, 29 November 2009 09:22
		Re: Vacuum Advance By: jwillard on Sun, 29 November 2009 09:56
		Re: Vacuum Advance By: Ken Burton on Sun, 29 November 2009 14:39
		Re: Vacuum Advance By: roy1 on Sun, 29 November 2009 19:04
		Re: Vacuum Advance By: Ken Burton on Sun, 29 November 2009 23:29
		Re: [GMCnet] Vacuum Advance By: USAussie on Mon, 30 November 2009 01:01
		Re: [GMCnet] Vacuum Advance By: Ken Burton on Mon, 30 November 2009 01:53
		Re: [GMCnet] Vacuum Advance By: ljdavick on Mon, 30 November 2009 19:07
		Re: [GMCnet] Vacuum Advance By: mike miller on Mon, 30 November 2009 21:40
		Re: Vacuum Advance By: mdryan on Mon, 30 November 2009 08:01
		Re: [GMCnet] Vacuum Advance By: Jim Bounds on Mon, 30 November 2009 08:47
		Re: [GMCnet] Barbie GMC on eBay (#140362019346) By: k2gkk on Sun, 29 November 2009 11:06
		Re: [GMCnet] Vacuum Advance By: Steven Ferguson on Sun, 29 November 2009 15:49
		Re: Vacuum Advance By: fred v on Sun, 29 November 2009 14:23
		Re: Vacuum Advance By: Bob de Kruyff on Mon, 30 November 2009 16:32
		Re: Vacuum Advance By: Mike_H on Sat, 12 October 2019 10:21

Previous Topic:	[GMCnet] lower steering shaft complete new replacement
Next Topic:	Another "Not News to Us" article

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 23 20:15:44 CDT 2024

Total time taken to generate the page: 0.00891 seconds