GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » [GMCnet] Stainless Steel polishing/scratch removal
Re: [GMCnet] Stainless Steel polishing/scratch removal [message #63486 is a reply to message #63485] Sun, 08 November 2009 17:30 Go to previous messageGo to previous message
fred v is currently offline  fred v   United States
Messages: 999
Registered: April 2006
Location: pensacola, fl.
Karma:
Senior Member
part of the problem is that as you sand to remove the scratch you also thin the metal in that area. when polished the depression will reflect light and be visable. to eliminate this effect you have to feather the sanding out over a broad area to diminish the reflection. it just takes time. the brushed finish may end up looking better and will hide future scratches better.
good luck,

Fred V
'77 Royale RB 455
P'cola, Fl

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Gas leak just before complete refill
Next Topic: Refueling Isolator valve
Goto Forum:
  


Current Time: Fri Sep 27 09:41:41 CDT 2024

Total time taken to generate the page: 0.00540 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software