GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Refueling Isolator valve (who makes a 1" manual or solenoid valve to allow fueling of the tanks seporately?)
Re: Refueling Isolator valve [message #63285 is a reply to message #63219] Fri, 06 November 2009 11:00 Go to previous messageGo to previous message
Duce Apocalypse is currently offline  Duce Apocalypse   United States
Messages: 824
Registered: May 2009
Location: Los angeles
Karma:
Senior Member
well part of my reason to isolate the tanks was I needed to see if I fixed the rear fuel tank float. so I just rigged a plug fo the aux tank out of a bottle cap and stuck it in the fuel pipe. 70.50 filled the rear tank with 23.5 gallons, it had a couple in it already, my tanks ae transfer flow 26.5 gal tanks. Im happy to say it does seem the rear gauge works, and its nice nice not to have to pay $150 to find this out.

still I would like to have a switchable means of isolating the tanks should I choose. so any info regarding a transfer valve would be greatly appreciated...

73 Canyon Lands, (a.k.a. The Yellow Submarine) West Los Angeles CA

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Stainless Steel polishing/scratch removal
Next Topic: Holley 08670 Street Avenger Carb, Install report
Goto Forum:
  


Current Time: Fri Jun 28 20:09:41 CDT 2024

Total time taken to generate the page: 0.01320 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software