GMCforum: GMCnet » Refueling Isolator valve

Home » Public Forums » GMCnet » Refueling Isolator valve (who makes a 1" manual or solenoid valve to allow fueling of the tanks seporately?)

Show: Today's Messages :: Polls :: Message Navigator

Re: Refueling Isolator valve [message #63231 is a reply to message #63219]

Thu, 05 November 2009 13:55

rgleas

Messages: 48
Registered: May 2009
Location: Tulsa, Ok.

Karma:

Member

I have contimplated the same issue as it does become some what of a problem when ported fuel injection is used. While I haven't done it yet, I intend to use a 1" ball valve wit a acuator rod. Primative but cheap.

Report message to a moderator

[Message index]

		Refueling Isolator valve By: Duce Apocalypse on Thu, 05 November 2009 11:39
		Re: [GMCnet] Refueling Isolator valve By: powerjon on Thu, 05 November 2009 11:45
		Re: [GMCnet] Refueling Isolator valve By: GMC_LES on Thu, 05 November 2009 12:10
		Re: [GMCnet] Refueling Isolator valve By: mlincoln on Thu, 05 November 2009 12:22
		Re: Refueling Isolator valve By: rgleas on Thu, 05 November 2009 13:55
		Re: Refueling Isolator valve By: Duce Apocalypse on Fri, 06 November 2009 11:00
		Re: Refueling Isolator valve By: jwillard on Fri, 06 November 2009 12:07
		Re: Refueling Isolator valve By: Duce Apocalypse on Fri, 06 November 2009 20:21
		Re: Refueling Isolator valve By: jwillard on Sat, 07 November 2009 09:47
		Re: Refueling Isolator valve By: Duce Apocalypse on Mon, 09 November 2009 11:07

Previous Topic:	[GMCnet] Stainless Steel polishing/scratch removal
Next Topic:	Holley 08670 Street Avenger Carb, Install report

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Sep 28 16:54:19 CDT 2024

Total time taken to generate the page: 0.01553 seconds