GMCforum: GMCnet » Onan Carburetor

Home » Public Forums » GMCnet » Onan Carburetor

Show: Today's Messages :: Polls :: Message Navigator

Re: Onan Carburetor [message #371451 is a reply to message #371449]

Wed, 19 July 2023 09:23

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

I'm an electronics guy so I was looking at going EFI with something like this once my carb and or choke solenoid gives up.

https://ecotrons.com/small_engine_fuel_injection_kit/400cc_to_800cc_engine_fuel_injection_kit/

I believe for our engines the kit works out to about $300. USD.

Wally Anderson built his own EFI intake manifold using MicroSquirt.

But that's just me...

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Onan Carburetor By: Bruce Hart on Wed, 19 July 2023 05:13
		Re: Onan Carburetor By: Matt Colie on Wed, 19 July 2023 09:07
		Re: Onan Carburetor By: RF_Burns on Wed, 19 July 2023 09:23
		Re: Onan Carburetor By: rgogan on Wed, 19 July 2023 12:33
		Re: Onan Carburetor By: jhbridges on Thu, 20 July 2023 07:13

Previous Topic:	Trans Fluid in Final Drive
Next Topic:	Main bulkhead connector

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 06 08:01:03 CDT 2024

Total time taken to generate the page: 0.00447 seconds