GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Buzz Box Replacement (PD9245C Wiring Progressive Dynamics)
Re: Buzz Box Replacement [message #371409 is a reply to message #371397] Sun, 11 June 2023 19:13 Go to previous messageGo to previous message
cadelec is currently offline  cadelec   Australia
Messages: 303
Registered: September 2011
Location: Brisbane Australia
Karma:
Senior Member
Rather than replacing cables it might be easier to install a fuse that is a little less than the current carrying capacity of the wire. If the fuse never blows all good. If the fuse blows then you go to the trouble of replacing the cable. Just need to work out which is the easiest way to go

Trevor Brisbane Australia Siesta Koala 76 Edgemont (old Bobby Moores) 71 Cadillac Eldo Convert 58 Cadillac Eldorado Brougham Project
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Deleting a single pic from a photo site album
Next Topic: Trans Fluid in Final Drive
Goto Forum:
  


Current Time: Fri Sep 27 07:00:26 CDT 2024

Total time taken to generate the page: 0.01820 seconds